EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 388 (2023) MATEC Web Conf., 388 (2023) 05003 References
Open Access
Issue
MATEC Web Conf.
Volume 388, 2023
2023 RAPDASA-RobMech-PRASA-AMI Conference Advanced Manufacturing Beyond Borders - The 24th Annual International RAPDASA Conference joined by RobMech, PRASA and AMI, hosted by CSIR and CUT
Article Number 05003
Number of page(s) 17
Section Product Design and Development
DOI https://doi.org/10.1051/matecconf/202338805003
Published online 15 December 2023
  1. A. Y. Lin and L. M. Yarholar, Mo Med. 117, 136–142 (2020) [Google Scholar]
  2. Britannica Academic. plastic surgery [Online]. Available: https://academic.eb.com/levels/collegiate/article/plastic-surgery/60337#280716.toc. [February 23, 2023]. [Google Scholar]
  3. L. Pillay, M. Mabongo, and B. Buch, SADJ, 73, 348–353 (2018) [Google Scholar]
  4. Exper Market Research. Global Craniomaxillofacial Implants Market Report and Forecast 2023-2028 [Online]. Available https://www.expertmarketresearch.com/reports/craniomaxillofacial-implants-market [April 19, 2023]. [Google Scholar]
  5. Data Bridge Market Research. Middle East and Africa Craniomaxillofacial Implanats Market Definition, Revenue, Scope, & Analysis By 2029 [Online]. https://www.databridgemarketresearch.com/reports/middle-east-and-africa-craniomaxillofacial-implants-market [April 18, 2023]. [Google Scholar]
  6. E. Altiok, B. Berg-Johansen, S. Lovald, and S. M. Kurtz, Applications of Polyetheretherketone in Craniomaxillofacial Surgical Reconstruction, in PEEK Biomaterials Handbook, William Andrew Publishing, 319–331, 2019. [CrossRef] [Google Scholar]
  7. A. M. Shah, H. Jung, and S. Skirboll, Neurosurg. Focus., vol. 36, E19 (2014) [CrossRef] [Google Scholar]
  8. N. C. Paxton, Additive manufacturing patient-specific porous High-Density Polyethylene surgical implants (Queensland University of Technology, Brisbane City, 2020) [Google Scholar]
  9. A. Rai, A. Datarkar, A. Arora, and D. G. Adwani, J. Maxillofac. Oral Surg., 13, 42–46 (2014) [CrossRef] [Google Scholar]
  10. S. Mohammadi, S. Ghourchian, F. Izadi, A. Daneshi, and A. Ahmadi, Head Face Med., 8, 1–5 (2012) [CrossRef] [Google Scholar]
  11. A. Festas, A. Ramos, and J. Davim, Proc. Inst. Mech. Eng. L, 234, 218–228 (2020) [CrossRef] [Google Scholar]
  12. Z. Al-Dulimi, M. Wallis, D. K. Tan, M. Maniruzzaman, and A. Nokhodchi, Drug Discov. Today, 26, 360–383 (2021) [CrossRef] [Google Scholar]
  13. P. Szymczyk-Ziółkowska, M. B. Łabowska, J. Detyna, I. Michalak, and P. Gruber, Biocybern. Biomed. Eng., 40, 624–638 (2020) [CrossRef] [Google Scholar]
  14. Patent ISO/ASTM 52900:2021. Additive manufacturing - General principles - Fundamentals and vocabulary (2021) [Google Scholar]
  15. O. A. Mohamed, S. H. Masood, and J. L. Bhowmik, Adv. Manuf., 3, 42–53 (2015) [CrossRef] [Google Scholar]
  16. M. Spoerk, C. Holzer, and J. Gonzalez-Gutierrez, J. Appl. Polym. Sci., 137, 48545, (2020) [CrossRef] [Google Scholar]
  17. A. Maguire, N. Pottackal, M. A. S. R. Saadi, M. M. Rahman, and P. M. Ajayan, Oxford Open Materials Science, 1, itaa004 (2020) [CrossRef] [Google Scholar]
  18. S. C. Ligon, R. Liska, J. Stampfl, M. Gurr, and R. Mülhaupt, Chem. Rev., 117, 10212–10290 (2017) [CrossRef] [Google Scholar]
  19. Polyolefin Compounds and Materials: Fundamentals and Inductrial Applications, 1st ed. in Springer Series on Polymer and Composite Materials, 2364-1878. Springer International Publishing, 2016. [Google Scholar]
  20. G. Ryan, A. Pandit, and D. P. Apatsidis, Biomaterials, 27, 2651–2670 (2006) [CrossRef] [Google Scholar]
  21. R. Velu and S. Singamneni, Proc. Inst. Mech. Eng., C: J. Mech. Eng. Sci., 229, 603–613 (2015) [CrossRef] [Google Scholar]
  22. A. Kantaros and D. Piromalis, Appl. Mech., 2, 289–302 (2021) [CrossRef] [Google Scholar]
  23. C. Frantz, K. M. Stewart, and V. M. Weaver, J. Cell. Sci., 123, 4195–4200 (2010) [CrossRef] [Google Scholar]
  24. I. D. Papel, J. L. Frodel, G. R. Holt, N. E. Nachlas, and S. Park, Facial Plastic and Reconstructive Surgery, Thieme Medical Publishers (2016) [Google Scholar]
  25. I. Maimouni, C. M. Cejas, J. Cossy, P. Tabeling, and M. Russo, Micromachines, 11, 83 (2020) [CrossRef] [Google Scholar]
  26. S. Ali, O. A. Aziz, and M. Ahmed, Maxillofac. Plast. Reconstruct. Surg., 44, 1–7 (2022) [CrossRef] [Google Scholar]
  27. R. Rauso, G. Lo Giudice, C. Lo Faro, G. F. Nicoletti, R. Fragola, E. Sesenna, and G. Tartaro, J. Appl. Sci., 10, 18, (2020) [Google Scholar]
  28. T. Hsieh, K. Dhir, W. J. Binder, and P. A. Hilger, Facial Plast. Surg., 37, 741–750 (2021) [CrossRef] [Google Scholar]
  29. S. Jindal, F. Manzoor, N. Haslam, and E. Mancuso, Int. J. Adv. Manuf. Technol., 112, 635–653 (2021) [CrossRef] [Google Scholar]
  30. J. Lommen, L. Schorn, C. Sproll, J. Haussmann, N. R. Kubler, W. Budach, M. Rana and B. Tamaskovics, J. Oral Maxillofac. Surg., 80, 1272–1283 (2022) [CrossRef] [Google Scholar]
  31. D. Mihov and B. Katerska, Trakia J. Sci., Ser. Soc. Sci., 8, 119–125 (2010) [Google Scholar]
  32. S. Bose, D. Ke, H. Sahasrabudhe, and A. Bandyopadhyay, Prog. Mater. Sci., 93, 45–111 (2018) [CrossRef] [Google Scholar]
  33. P. Bartolo, J. Kruth, J. Silva, G. Levy, A. Malshe, K. Rajurkar, M. Mitsuishi, J. Ciurana, and M. Leu, CIRP Ann., 61, 635–655 (2012) [CrossRef] [Google Scholar]
  34. H. Hamod, Suitability of recycled HDPE for 3D printing filament (Arcada University of Applied Sciences, Helsinki, 2015.) [Google Scholar]
  35. J. A. Juhasz, S. M. Best, W. Bonfield, M. Kawashita, N. Miyata, T. Kokubo, and T. Nakamura. J. Mater. Sci.: Mater. Med., 14, 489–95 (2003) [CrossRef] [Google Scholar]
  36. V. Campana, G. Milano, E. Pagano, M. Barba, C. Ciocione, G. Salonna, W. Lattanzi and G, Logroscino, J. Mater. Sci.: Mater. Med., 25, 2445–2461 (2014) [CrossRef] [Google Scholar]
  37. A. Matsuno, H. Tanaka, H. Iwamuro, S. Takanashi, S. Miyawaki, M. Nakashima and T, Nagashima, Acta Neurochir., 148, 535–540 (2006) [CrossRef] [Google Scholar]
  38. D. I. Ilan and A. L. Ladd, Operative Techniques in Plastic and Reconstructive Surgery, 9, 151–160 (2002) [CrossRef] [Google Scholar]
  39. Poriferous. Product Catalog. [Online]. Available: https://poriferous.com/catalog-all/ [September 15, 2022] [Google Scholar]
  40. Stryker. MEDPOR Polyethylene Implants. [Online]. Available: https://www.stryker.com/us/en/craniomaxillofacial/systems/medpor.html [September 15, 2022] [Google Scholar]
  41. R. Winarso, P. W. Anggoro, R. Ismail, J. Jamari, and A. P. Bayuseno, Heliyon, 8, e11701 (2022) [CrossRef] [Google Scholar]
  42. D. M. Devine, Ed., Polymer-Based Additive Manufacturing: Biomedical Applications. Cham, Springer International Publishing AG, 2019. [CrossRef] [Google Scholar]
  43. A. Sola, Macromol. Mater. Eng., 307, 2200197 (2022) [CrossRef] [Google Scholar]
  44. S. Petersmann M. Spoerk, W. van de Steene, M. Ucal, J. Wiener, G. Pinter and F. Arbeiter, J. Mech. Behav. Biomed. Mater., 104, 103611 (2020) [CrossRef] [Google Scholar]
  45. C. Duty, C. Ajinjeru, V. Kishore, B. Compton, N. Hmeidat, X. Chen, P. Liu, A. A. Hassen, J. Lindahl, and V. Kunc, J. Manuf. Process., 35, 526–537 (2018) [CrossRef] [Google Scholar]
  46. D. Popescu, A. Zapciu, C. Amza, F. Baciu, and R. Marinescu, Polym. Test., 69, 157–166 (2018) [CrossRef] [Google Scholar]
  47. A. Dey, I. N. Roan Eagle, and N. Yodo, J. Manuf. Mater. Process., 5, Art. (2021) [Google Scholar]
  48. N. Verma, P. Awasthi, A. Gupta, and S. S. Banerjee, Macromol. Mater. Eng., 308, 2200421 (2023) [CrossRef] [Google Scholar]
  49. C. Wampol, Additive Manufacturing with High Density Polyethylene: Mechanical Properties Evaluation (South Dakota University, Brookings, South Dakota, 2018) [Google Scholar]
  50. C. G. Schirmeister, T. Hees, E. H. Licht, and R. Mülhaupt, Addit. Manuf., 28, 152–159 (2019) [Google Scholar]
  51. Q. Tarrés, J. K. Melbø, M. Delgado-Aguilar, F. X. Espinach, P. Mutjé, and G. Chinga-Carrasco, Compos. B. Eng., 153, 70–77 (2018) [CrossRef] [Google Scholar]
  52. S. Chong, G. Pan, M. Khalid, T. C. k Yang, S. Hung, and C. Huang, J. Polym. Environ., 25, 136–145 (2017) [CrossRef] [Google Scholar]
  53. F. M. Mwema and E. T. Akinlabi, Fused Deposition Modeling: Strategies for Quality Enhancement. Springer International Publishing AG, 2020. [CrossRef] [Google Scholar]
  54. H. Valkenaers, F. Vogeler, A. Voet, and J. P. Kruth, Screw extrusion based 3D printing, a novel additive manufacturing technology in Proceedings of the 5th international conference on competitive manufacturing, University of Stellenbosch; Stellenbosch, 2013, pp. 97–103. [Google Scholar]
  55. S. Koga, D. Straub, M. Diagne, and M. Krstic, Thermodynamic Modeling and Control of Screw Extruder for 3D Printing in Proceedings of 2018 Annual American Control Conference, 27-29 June 2018, Milwaukee, USA (2018) [Google Scholar]
  56. Reddy M. Karthik and Bogu V. Phanindra, Int. J. of Curr. Eng. and Technol., 11, 1–7 (2021) [CrossRef] [Google Scholar]
  57. S. Whyman, K. M. Arif, and J. Potgieter, Int. J. Adv. Manuf. Technol., 96, 3417–3428 (2018). [CrossRef] [Google Scholar]
  58. J. Yin, J. Zhong, J. Wang, Y. Wang, T. Li, L. Wang, Y. Yang, Z. Zhen, Y. Li, H. Zhang, S. Zhong, Y. Wu, and W. Huang, Mater. Today Bio, 16, 100361 (2022) [CrossRef] [Google Scholar]
  59. J. M. Justino Netto, H. T. Idogava, L. E. Frezzatto Santos, Z. de C. Silveira, P. Romio, and J. L. Alves, Int. J. Adv. Manuf. Technol., 115, 2711–2727 (2021) [CrossRef] [Google Scholar]
  60. J. W. Tseng, C. Liu, Y. Yen, J. Belkner, T. Bremicker, B. H. Liu, T. Sun, and A. Wang, Mater. Des., 140, 209–221, (2018) [CrossRef] [Google Scholar]
  61. B. Setiawan, D. Permatasari, A. Sumari, T. Winarno, V. Audiana, and A. Maulidia, HDPE plastic extruder design and control for 3D printing with plastic pellet feeding method in Proceedings of the Second Annual Technology, Applied Science and Engineering Conference (ATASEC 2020) and 11th Joint National Seminar on Engineering 2020, 5-6 August 2020, Malang, Indonesia (2021) [Google Scholar]
  62. M. C. Montoya-Ospina, J. Zeng, X. Tan, and T. A. Osswald, Polymers, 15, Art. (2023) [Google Scholar]
  63. P. Pinter, S. Baumann, C. Lohr, A. Heuer, L. Englert, and K. A. Weidenmann, Mechanical Properties of Additively Manufactured Polymer Samples using a Piezo Controlled Injection Molding Unit and Fused Filament Fabrication compared with a Conventional Injection Molding Process in Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium, SFF, 13-15 August 2018, Austin, USA (2018). [Google Scholar]
  64. Y. Chen, M. Neff, B. McEvoy, Z. Cao, R. Pezzoli, A. Murphy, N. Gately, M. Hopkins, N. J. Rowan, D. M. Devine, Polymer, 183, 121870 (2019) [CrossRef] [Google Scholar]
  65. P. Jeyachandran, S. Bontha, S. Bodhak, V. K. Balla, and M. Doddamani, Comps. Sci. Technol., 213, 108966 (2020) [Google Scholar]
  66. C. Schmutzler, A. Zimmermann, and M. F. Zaeh, Procedia Cirp, 41, 1017–1022 (2016) [CrossRef] [Google Scholar]
  67. R. Ranganathan, T. Ravi, and A. Pugalendhi, Int. J. Integr. Eng., 11, 207–216 (2019) [CrossRef] [Google Scholar]
  68. U. Yaman, Int. J. Adv. Manuf. Technol., 94, 2187–2197 (2018) [CrossRef] [Google Scholar]
  69. A. Guerrero-de-Mier, M. M. Espinosa, and M. Domínguez, Procedia Eng., 132, 126–131 (2015) [CrossRef] [Google Scholar]
  70. H. C. Park, J. Ryu, S. Jung, H.-J. Park, H.-K. Oh, and M.-S. Kook, Materials, 15 (2022) [Google Scholar]
  71. S. M. Rea, R. A. Brooks, S. M. Best, T. Kokubo, and W. Bonfield, Biomaterials, 25, 4503–4512 (2004) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.