EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 366 (2022) MATEC Web Conf., 366 (2022) 01005 References
Open Access
Issue
MATEC Web Conf.
Volume 366, 2022
8th International BAPT Conference “Power Transmissions 2022”
Article Number 01005
Number of page(s) 8
Section Design, Analysis, Simulation and Optimization
DOI https://doi.org/10.1051/matecconf/202236601005
Published online 06 October 2022
  1. H. Polinder, J. A. Ferreira, B. B. Jensen, A. B. Abrahamsen, K. Atallah and R. A. McMahon, “Trends in Wind Turbine Generator Systems, ” in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 1, no. 3, pp. 174-185, Sept. 2013, doi: 10.1109/JESTPE.2013.2280428. [CrossRef] [Google Scholar]
  2. Vlastimir Nikolić, Shahin Sajjadi, Dalibor Petković, Shahaboddin Shamshirband, Žarko Ćojbašić, Lip Yee Por, Design and state of art of innovative wind turbine systems, Renewable and Sustainable Energy Reviews, Volume 61, 2016, Pages 258-265 [CrossRef] [Google Scholar]
  3. Xiuxing Yin, Wencan Zhang, Xiaowei Zhao, Current status and future prospects of continuously variable speed wind turbines: A systematic review, Mechanical Systems and Signal Processing, Volume 120, 2019, Pages 326-340 [CrossRef] [Google Scholar]
  4. Kotwica, K., Stopka, G., Kalita, M., Bałaga, D., & Siegmund, M. (2021). Impact of Geometry of Toothed Segments of the Innovative KOMTRACK Longwall Shearer Haulage System on Load and Slip during the Travel of a Track Wheel. Energies, 14(9), 2720. [CrossRef] [Google Scholar]
  5. S. V. Bondarev, O. V. Zakora The Application of C Involute Gearing in the Escalator Drive Research Bulletin of NTUU “Kyiv Polytechnic Institute”, 2011, 2: 108-115. [Google Scholar]
  6. Ivanov, V., Karaivanov, D., & Ghumachenko, I. Study of the geometry of rack train of a shearer loader’s haulage system. In Proceeding 5-th Internacional Conference “Mechanical Engineering in XXI Centure”, (nov. 2010), Nish, Serbia. [Google Scholar]
  7. Fargo, R. N. (2006). U.S. Patent No. 7, 137, 500. Washington, DC: U.S. Patent and Trademark Office. [Google Scholar]
  8. Jurj, L., Velicu, R., & Săulescu, R. (2018). Geometry of silent chain-involute sprocket. In MATEC Web of Conferences (Vol. 184, p. 02003). EDP Sciences. [CrossRef] [EDP Sciences] [Google Scholar]
  9. Sun, W., Liu, X. L., Liu, J. J., & Zhang, W. (2012). Center Distance Change of Silent Chain Drive Effect on Sprocket Tooth Profile Modification. In Key Engineering Materials (Vol. 522, pp. 574-577). Trans Tech Publications Ltd. [CrossRef] [Google Scholar]
  10. SU, Wen Yi; WU, Yu Ren. Design Optimization of a Rocker-Joint Silent Chain and Sprocket Drive Based on the Mesh Performance Indices. In: Applied Mechanics and Materials. Trans Tech Publications Ltd, 2012. p. 104-109. [CrossRef] [Google Scholar]
  11. S. Roy, D. (2021). Mechanics and FEM estimation of deformation, gaps and stresses generated in starring active contacts of GEROTOR units during operation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(9), 1-20. [CrossRef] [Google Scholar]
  12. Pellegri, M., Manne, V. H. B., & Vacca, A. (2020). A simulation model of Gerotor pumps considering fluid–structure interaction effects: Formulation and validation. Mechanical Systems and Signal Processing, 140, 106720. [CrossRef] [Google Scholar]
  13. Huang, M., Shi, C., Zhu, Y., Zhang, J., & Zhang, F. (2021). Design of Gerotor Pump and Influence on Oil Supply System for Hybrid Transmission. Energies, 14(18), 5649. [CrossRef] [Google Scholar]
  14. Pareja-Corcho, J., Moreno, A., Simoes, B., Pedrera Busselo, A., San-Jose, E., Ruiz-Salguero, O., & Posada, J. (2021). A Virtual Prototype for Fast Design and Visualization of Gerotor Pumps. Applied Sciences, 11(3), 1190. [CrossRef] [Google Scholar]
  15. Roy, D., Maiti, R., Das, P. K., Antoniak, P., & Stryczek, J. (2021). Estimations of leakages through gaps at ‘transition’contacts using computational fluid dynamics and photoimaging of core-flow cavitation features in Gerotor pumps. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235(5), 1748-1770. [CrossRef] [Google Scholar]
  16. K. Mori, T. Maeno, Y. Fukui CIRP annals, 60(1), 299-302 (2011) [CrossRef] [Google Scholar]
  17. K. Gupta, N. Jain The International Journal of Advanced Manufacturing Technology, 72(9-12), 1735-1745 (2014) 3. C. (3) Özel The International Journal of Advanced Manufacturing Technology, 54(1-4), 203-213 (2011) [CrossRef] [Google Scholar]
  18. Ivanov, V., Karaivanov, D., Ivanova, S., & Volkova, M. (2019). Gear mesh geometry effect on performance improvement for external gear pumps. In MATEC Web of Conferences (Vol. 287, p. 01007). EDP Sciences. [CrossRef] [EDP Sciences] [Google Scholar]
  19. Saleem, A. M., Alyas, B. H., & Shaalan, Z. A. (2021). Numerical analysis of standard-unstandard gears for an external gear pumps. International Journal of Fluid Machinery and Systems, 14(1), 2533. [CrossRef] [Google Scholar]
  20. Asal, C. (2021). Düz dişli profil ve istikamet sapmalarının pompalarda ses ve verim üzerindeki etkilerinin incelenmesi (Master’s thesis, Tekirdağ Namık Kemal Üniversitesi). [Google Scholar]
  21. Mithun, M. G., Koukouvinis, P., Karathanassis, I. K., & Gavaises, M. (2019). Numerical simulation of three-phase flow in an external gear pump using immersed boundary approach. Applied Mathematical Modelling, 72, 682-699. [CrossRef] [Google Scholar]
  22. Göksenli, A., & Eryürek, I. B. (2009). Failure analysis of an elevator drive shaft. Engineering failure analysis, 16(4), 1011-1019. [CrossRef] [Google Scholar]
  23. Radojcic, D. (1997, September). Tip-Driven Marine Propellers and Impellers-A Novel Propulsion Concept. In SNAME 8th Propeller and Shafting Symposium. OnePetro. [Google Scholar]
  24. Ivanov, V., Urum, G., Ivanova, S., & Volkova, M. (2018). Development of the positive engagement continuously variable transmission design with the application of graph theory. ВосточноЕвропейский журнал передовых технологий, (3 (1)), 43-50. [Google Scholar]
  25. Andrew Harold Tilstra, Carolyn Conner Seepersad & Kristin L. Wood (2012) A high-definition design structure matrix (HDDSM) for the quantitative assessment of product architecture, Journal of Engineering Design, 23:10-11, 767-789 [CrossRef] [Google Scholar]
  26. Wang, S., Li, Z., He, C., Liu, D., & Zou, G. (2021). An Integrated Method for Modular Design Based on Auto-Generated Multi-Attribute DSM and Improved Genetic Algorithm. Symmetry, 14(1), 48. [CrossRef] [Google Scholar]
  27. Moulick, E., & Wani, K. (2019). Development of an Innovative Transmission System for Two-Wheelers Using TRIZ Methodology (No. 2019-26-0369). [Google Scholar]
  28. Ivanov, V., Dimitrov, L., Ivanova, S., & Naleva, G. (2019). A heuristic method for transmission design. In MATEC Web of Conferences (Vol. 287, p. 01013). EDP Sciences. [CrossRef] [EDP Sciences] [Google Scholar]
  29. K. Arnaudov, D. Karaivanov, Higher compound planetary gear trains, VDI-Berichte 1904-1, 327-344 (2005) [Google Scholar]
  30. Xue, H. L., Liu, G., & Yang, X. H. (2016). A review of graph theory application research in gears. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230(10), 1697-1714. [CrossRef] [Google Scholar]
  31. Pennestri, E., & Belfiore, N. P. (2015). On Crossley’s contribution to the development of graphbased algorithms for the analysis of mechanisms and gear trains. Mechanism and Machine Theory, 89, 92-106. [CrossRef] [Google Scholar]
  32. D.P. Karaivanov, S. Troha, Optimal selection of the structural scheme of compound two-carrier planetary gear trains and their parameters, 339403 in: Radzevich, S.P., (Editor), Recent Advances in Gearing: Scientific Theory and Applications, Springer, 1st ed. (2022) [Google Scholar]
  33. Maier, J. R., & Fadel, G. M. (2009). Affordancebased design methods for innovative design, redesign and reverse engineering. Research in Engineering Design, 20(4), 225-239. [CrossRef] [Google Scholar]
  34. Ivanov, V., Dimitrov, L., Ivanova, S., & Volkova, M. (2021, June). Reverse Engineering in the Remanufacturing: Metrology, Project Management, Redesign. In International Conference “New Technologies, Development and Applications” (pp. 169-176). Springer, Cham. [Google Scholar]
  35. Chandra, M., Dan, P.K. (2019). A Novel Gear Shifting Strategy for Dual Clutch Transmission System Using Reverse Engineering and Robust Design Technique. In: Uhl, T. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73. Springer, Cham. [Google Scholar]
  36. G. Dúbravčík, M., & Kender, Š. (2012). Application of reverse engineering techniques in mechanics system services. Procedia Engineering, 48, 96-104. [CrossRef] [Google Scholar]
  37. Gonzalez-Perez, I., & Fuentes-Aznar, A. (2022). Reverse engineering of spiral bevel gear drives reconstructed from point clouds. Mechanism and Machine Theory, 170, 104694. [CrossRef] [Google Scholar]
  38. Y. Benabid and S. Mansouri, (2016) “Dynamics study and diagnostics with vibration analysis from worm gear manufactured by reverse engineering techniques, ” Journal of Vibroengineering, Vol. 18, No. 7, pp. 4458–4471 [CrossRef] [Google Scholar]
  39. K. Nikolov, V. Ivanov, O. Cankaya, L. Dimitrov, Use of carbon nanotube composites in gearing, Proceedings of ВАРТ 2016, 23-30, 5-8 Oct. (2016), Ohrid, Makedonia [Google Scholar]
  40. Urbas, U.; Zorko, D.; Vukašinović, N.; Černe, B. Comprehensive Areal Geometric Quality Characterisation of Injection Moulded Thermoplastic Gears. Polymers 2022, 14, 705. https://doi.org/10.3390/polym14040705 [CrossRef] [Google Scholar]
  41. Stahl, K. (2022). Foreword “Best of Gears 2022”. Forschung im Ingenieurwesen, 86, 249 (2022) 1-1 [CrossRef] [Google Scholar]
  42. Winkler, K. J., Schmitt, M., Tobie, T., Schlick, G., Stahl, K., & Daub, R. (2023). Characterization and Influences of the Load Carrying Capacity of Lightweight Hub Designs of 3D-Printed Gears (16MnCr5, PBF-LB/M-Process). In Proceedings of the Munich Symposium on Lightweight Design 2021 (pp. 160-174). Springer Vieweg, Berlin, Heidelberg. [Google Scholar]
  43. Wang, W.S., Fong, Z.H.: A dual face-hobbing method for the cycloidal crowning of spur gears. Mech. Mach. Theory 43(11), 1416–1430 (2008) [CrossRef] [Google Scholar]
  44. D. Ivanov, V. Urum, G. Ivanova, S. (2020). Achieving Crowning Contact of Spur Bevel Gears Through Deliberately Introduced Mounting Errors. In: Karabegović, I. (eds) New Technologies, Development and Application III. NT 2020. Lecture Notes in Networks and Systems, vol 128. Springer, Cham. [Google Scholar]
  45. Tsuji, I., Kawasaki, K., Gunbara, H., Houjoh, H., Matsumura, S.: Tooth contact analysis and manufacture on multitasking machine of large-sized straight bevel gears with equi-depth teeth. J. Mech. Des. 135(3), 034504 (2013) [CrossRef] [Google Scholar]
  46. Ding, H., Li, H., Chen, S., Shi, Y., Wang, Y., Rong, K., & Lu, R. (2022). Energy loss and mechanical efficiency forecasting model for aero-engine bevel gear power transmission. International Journal of Mechanical Sciences, 231, 107569. [CrossRef] [Google Scholar]
  47. Hu, X., Li, P., Quan, C., & Wang, J. (2022). CFD Investigation on Oil Injection Lubrication of Meshing Spur Gears via Lattice Boltzmann Method. Lubricants, 10(8), 184. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.