Open Access
Issue |
MATEC Web Conf.
Volume 366, 2022
8th International BAPT Conference “Power Transmissions 2022”
|
|
---|---|---|
Article Number | 01006 | |
Number of page(s) | 4 | |
Section | Design, Analysis, Simulation and Optimization | |
DOI | https://doi.org/10.1051/matecconf/202236601006 | |
Published online | 06 October 2022 |
- Stel, H., Sirino, T., Ponce, F. J., Chiva, S., Morales, R. E. M. (2015). Numerical investigation of the flow in a multistage electric submersible pump. Journal of Petroleum Science and Engineering, 136, 41–54. doi: https://doi.org/10.1016/j.petrol.2015.10.038 [CrossRef] [Google Scholar]
- Liu, H. (2010). Effects of Blade Number on Characteristics of Centrifugal Pumps. Chinese Journal of Mechanical Engineering, 23 (06), 742. doi: https://doi.org/10.3901/cjme.2010.06.742 [CrossRef] [Google Scholar]
- Korkmaz, E., Gölcü, M., Kurbanoğlu, C. (2017). Effects of Blade Discharge Angle, Blade Number and Splitter Blade Length on Deep Well Pump Performance. Journal of Applied Fluid Mechanics, 10 (2), 529–540. doi: https://doi.org/10.18869/acadpub.jafm.73.239.26056 [CrossRef] [Google Scholar]
- Bai, Y., Kong, F., Xia, B., Liu, Y. (2017). Effect of blade number matching of impeller and diffuser in high-speed rescue pump. Advances in Mechanical Engineering, 9 (5), 168781401770359. doi: https://doi.org/10.1177/1687814017703595 [CrossRef] [Google Scholar]
- Pukhliy, V. A. (2015). To calculation of disks of centrifugal pumps of hydraulic engineering constructions and the atomic power station. Teoriya mehanizmov i mashin, 13, 41–50. Available at: http://tmm.spbstu.ru/25/Pukhliy_25.pdf [Google Scholar]
- Yan, Y., Li, S., Zhang, R., Lin, F., Wu, R., Lu, Q. et. al. (2009). Rapid prototyping and manufacturing technology: Principle, representative technics, applications, and development trends. Tsinghua Science and Technology, 14 (S1), 1–12. doi: https://doi.org/10.1016/s1007-0214(09)70059-8 [CrossRef] [Google Scholar]
- Ramesh S., A Text book of Rapid Prototyping, January 2015, Edition: 1st Edition, Publisher: ANE Books, ISBN: 9789384726157 [Google Scholar]
- Zlenko M.A., Nagaytsev M.V., Dovbysh V.M., Additive technologies in mechanical engineering, 2015. [Google Scholar]
- Isametova, M., Nussipali, R., Karaivanov, D., Abilikhair, Z., Isametov, A. Computational and Experimental Study of the Composite Material for the Centrifugal Pump Impellers Manufacturing Journal of Applied and Computational Mechanics, 2022, 8(4), стр. 2383–4536 [Google Scholar]
- R. Rakibuzzaman, S. H. Suh, K. W. Kim, H. H. Kim, M. T. Cho, and I. S. Yoon, “A study on multistage centrifugal pump performance characteristics for variable speed drive system, ” Procedia Eng., vol. 105, no. Icte 2014, pp. 270–275, 2015. [CrossRef] [Google Scholar]
- C. Shao, C. Li, and J. Zhou, “International Journal of Heat and Fluid Flow Experimental investigation of fl ow patterns and external performance of a centrifugal pump that transports gas-liquid two-phase mixtures, ” Int. J. Heat Fluid Flow, vol. 71, no. September 2017, pp. 460–469, 2018. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.