EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 366 (2022) MATEC Web Conf., 366 (2022) 01004 References
Open Access
Issue
MATEC Web Conf.
Volume 366, 2022
8th International BAPT Conference “Power Transmissions 2022”
Article Number 01004
Number of page(s) 7
Section Design, Analysis, Simulation and Optimization
DOI https://doi.org/10.1051/matecconf/202236601004
Published online 06 October 2022
  1. Neves, C. G., Flores, Á., Figueiredo, D. L., & Nunes, A. S. (2014, December). Magnetic gear: A review. In 2014 11th IEEE/IAS International Conference on Industry Applications (pp. 1-6). IEEE. [Google Scholar]
  2. Praslicka, B., Gardner, M. C., Johnson, M., & Toliyat, H. A. (2021). Review and analysis of coaxial magnetic gear pole pair count selection effects. IEEE Journal of Emerging and Selected Topics in Power Electronics, 10(2), 1813-1822. [Google Scholar]
  3. Asnani, V., Scheidler, J., & Tallerico, T. F. (2018, May). Magnetic gearing research at NASA. In American Helicopter Society International Annual Forum & Technology Display (No. GRCE-DAA-TN54810). [Google Scholar]
  4. Scheidler, J. J., Asnani, V. M., & Tallerico, T. F. (2018, July). NASA’s magnetic gearing research for electrified aircraft propulsion. In 2018 AIAA/IEEE Electric Aircraft Technologies Symposium (EATS) (pp. 1-12). IEEE. [Google Scholar]
  5. Tallerico, T. F., Cameron, Z. A., Scheidler, J. J., & Hasseeb, H. (2020, August). Outer stator magnetically-geared motors for electrified urban air mobility vehicles. In 2020 AIAA/IEEE Electric Aircraft Technologies Symposium (EATS) (pp. 125). IEEE. [Google Scholar]
  6. Kjaer, A. B., Korsgaard, S., Nielsen, S. S., Demsa, L., & Rasmussen, P. O. (2019). Design, fabrication, test, and benchmark of a magnetically geared permanent magnet generator for wind power generation. IEEE Transactions on Energy Conversion, 35(1), 24-32. [Google Scholar]
  7. Li, K., Modaresahmadi, S., Williams, W. B., Wright, J. D., Som, D., & Bird, J. Z. (2019). Designing and experimentally testing a magnetic gearbox for a wind turbine demonstrator. IEEE Transactions on Industry Applications, 55(4), 3522-3533. [CrossRef] [Google Scholar]
  8. Li, K., Modaresahmadi, S., Williams, W. B., Bird, J. Z., Wright, J. D., & Barnett, D. (2019). Electromagnetic analysis and experimental testing of a flux focusing wind turbine magnetic gearbox. IEEE Transactions on Energy Conversion, 34(3), 1512-1521. [CrossRef] [Google Scholar]
  9. Klimina, L., Dosaev, M., & Selyutskiy, Y. (2017). Asymptotic analysis of the mathematical model of a wind-powered vehicle. Applied Mathematical Modelling, 46, 691-697. [CrossRef] [Google Scholar]
  10. Johnson, M., Gardner, M. C., Toliyat, H. A., Englebretson, S., Ouyang, W., & Tschida, C. (2018). Design, construction, and analysis of a large-scale inner stator radial flux magnetically geared generator for wave energy conversion. IEEE Transactions on Industry Applications, 54(4), 3305-3314. [CrossRef] [Google Scholar]
  11. Frandsen, T. V., Rasmussen, P. O., & Jensen, K. K. (2012, September). Improved motor intergrated permanent magnet gear for traction applications. In 2012 IEEE Energy Conversion Congress and Exposition (ECCE) (pp. 3332-3339). IEEE. [Google Scholar]
  12. Esnoz-Larraya, J., Valiente-Blanco, I., Cristache, C., Sanchez-Garcia-Casarrubios, J., Rodriguez Celis, F., Diez-Jimenez, E., & Perez-Diaz, J. L. (2017). Optimagdrive: High-performance magnetic gears development for space applications. Proceedings of the ESMATS. [Google Scholar]
  13. Li, K., & Bird, J. Z. (2018, September). A review of the volumetric torque density of rotary magnetic gear designs. In 2018 XIII International Conference on Electrical Machines (ICEM) (pp. 2016-2022). IEEE. [Google Scholar]
  14. Wang, Y., Filippini, M., Bianchi, N., & Alotto, P. (2019). A review on magnetic gears: Topologies, computational models, and design aspects. IEEE Transactions on Industry Applications, 55(5), 4557-4566. [CrossRef] [Google Scholar]
  15. Atallah, K., & Howe, D. (2001). A novel highperformance magnetic gear. IEEE Transactions on magnetics, 37(4), 2844-2846. [CrossRef] [Google Scholar]
  16. Jian, L., & Chau, K. T. (2010). A coaxial magnetic gear with Halbach permanent-magnet arrays. IEEE Transactions on Energy conversion, 25(2), 319328. [CrossRef] [Google Scholar]
  17. Jian, L., & Chau, K. T. (2009). Analytical calculation of magnetic field distribution in coaxial magnetic gears. Progress In Electromagnetics Research, 92, 1-16. [CrossRef] [Google Scholar]
  18. Zhang, X., Liu, X., Wang, C., & Chen, Z. (2014). Analysis and design optimization of a coaxial surface-mounted permanent-magnet magnetic gear. Energies, 7(12), 8535-8553. [CrossRef] [Google Scholar]
  19. Jian, L., Deng, Z., Shi, Y., Wei, J., & Chan, C. C. (2019). The mechanism how coaxial magnetic gear transmits magnetic torques between its two rotors: Detailed analysis of torque distribution on modulating ring. IEEE/ASME Transactions on Mechatronics, 24(2), 763-773. [CrossRef] [Google Scholar]
  20. Spałek, D. (2004). Analytical electromagnetic field and forces calculation for linear, cylindrical and spherical electromechanical converters. Bulletin of the Polish Academy of Sciences: Technical Sciences, 239-250. [Google Scholar]
  21. Niguchi, N., & Hirata, K. (2011). Cogging torque analysis of magnetic gear. IEEE transactions on industrial electronics, 59(5), 2189-2197. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.