EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 02001 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 02001
Number of page(s) 9
Section Modelling and Simulation, Structural Optimization
DOI https://doi.org/10.1051/matecconf/202235702001
Published online 22 June 2022
  1. D. Wojtkowiak, K. Talaśka, I. Malujda, G. Domek Estimation of the perforation force for polymer composite conveyor belts taking into consideration the shape of the piercing punch. Int J Adv Manuf Technol 98, 9-12, 2539–2561 (2018). [CrossRef] [Google Scholar]
  2. D. Wojtkowiak, K. Talaśka Determination of the effective geometrical features of the piercing punch for polymer composite belts. Int J Adv Manuf Technol 104, 1-4, 315–332 (2019). [CrossRef] [Google Scholar]
  3. D. Wojtkowiak, K. Talaśka, D. Wilczyński Evaluation of the belt punching process efficiency based on the resistance force of the compressed material, Int J Adv Manuf Technol, DOI: 10.1007/s00170-020-05819-4 (2020). [Google Scholar]
  4. D. Wojtkowiak, K. Talaśka, I. Malujda, G. Domek Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts. MATEC Web of Conferences, 157, 01022 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  5. U.P. Singh, A.H. Strepel, H.J.J. Kals Design study of the geometry of a punching/blanking tool. J Mat Process Technol 33, 331–345 (1992). [CrossRef] [Google Scholar]
  6. Choosing the Right Shear for Your Application. http://www.fabricatingandmetalworking.com - access 07.07.2020. [Google Scholar]
  7. Punch press tooling. http://www.theartofpressbrake.com - access 07.07.2020. [Google Scholar]
  8. Wilson High Performance™ Fab Toolingfor Thin Turretstrippit® Machines. https://www.wilsontool.com - access 07.07.2020. [Google Scholar]
  9. J. Górecki, I. Malujda, K. Talaśka Influence of the Value of Limit densification Stress on the Quality of Pellets During the Agglomeration Process of CO2. Procedia Engineering, 136, 269–274 (2016). [CrossRef] [Google Scholar]
  10. J. Górecki, I. Malujda, K. Talaśka, et al. Dry ice compaction in piston extrusion process. Acta Mechanica et Automatica, 11, 4, 313–316 (2017). [CrossRef] [Google Scholar]
  11. J. Górecki, K. Talaśka, K. Wałęsa, D. Wilczyński, D. Wojtkowiak Mathematical Model Describing the Influence of Geometrical Parameters of Multichannel Dies on the Limit Force of Dry Ice Extrusion Process. Materials, 13, 15 (2020). [Google Scholar]
  12. I. Malujda, D. Wilczyński Mechanical properties investigation of natural polymers. Procedia Engineering, 136, 263–268 (2016). [CrossRef] [Google Scholar]
  13. K. Talaśka, I. Malujda, D. Wilczyński Agglomeration of natural fibrous materials in perpetual screw technique - a challenge for designer. Procedia Engineering, 136, 63–69 (2016). [CrossRef] [Google Scholar]
  14. P. Krawiec, M. Pajtásová, F. Meler, Ł. Warguła Testing functional features of V-belt transmissions. IOP Conferences: Materials Science and Engineering, 776, 012008 (2020). [CrossRef] [Google Scholar]
  15. K. Wałęsa, I. Malujda, D. Wilczyński Experimental research of the thermoplastic belt plasticizing process in the hot plate welding. IOP Conferences: Materials Science and Engineering, 776, 1, 012011 (2020). [CrossRef] [Google Scholar]
  16. K. Wałęsa, I. Malujda, J. Górecki Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer. IOP Conferences: Materials Science and Engineering, 776, 1, 012107 (2020). [CrossRef] [Google Scholar]
  17. K. Wałęsa, I. Malujda, D. Wilczyński Shaping the parameters of cylindrical belt surface in the joint area. ActaMechanica et Automatica, 13, 4, 255–261 (2019). [Google Scholar]
  18. M. Kukla, P. Tarkowski, I. Malujda, K. Talaśka, J. Górecki Determination of the torque characteristics of stepper motor. Procedia Engineering, 136, 375–379 (2016). [CrossRef] [Google Scholar]
  19. A. Fierek, I. Malujda, K. Talaśka Design of a mechatronic unit for application of coats of adhesive. MATEC Web of Conferences, 254, 01019 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  20. Ł. Magdziak, I. Malujda, D. Wilczyński, D. Wojtkowiak Concept of improving positioning of pneumatic drive as drive of manipulator. Procedia Engineering, 177, 331–338 (2017). [CrossRef] [Google Scholar]
  21. P. Perz, I. Malujda, D. Wilczyński, P. Tarkowski Methods of controlling a hybrid positioning system using LabVIEW. Procedia Engineering, 177, 339–346 (2017). [CrossRef] [Google Scholar]
  22. P. Tarkowski, I. Malujda, K. Talaśka, J. Górecki, M. Kukla Influence of the type of acceleration characteristic of the stepping motor for efficient power usage. Procedia Engineering, 136, 370–374 (2016). [CrossRef] [Google Scholar]
  23. PolyBeltTM for Printing Machine and Book Binding Machine. www.nitta.de - access 07.07.2020. [Google Scholar]
  24. A. Fierek, I. Malujda, D. Wilczyński, K. Wałęsa Analysis of shaft selection in terms of stiffness and mass. IOP Conference Series: Materials Science and Engineering, 776, 012028 (2020). [CrossRef] [Google Scholar]
  25. D. Wojtkowiak, K. Talaśka, A. Fierek The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation, IOP Conferences: Materials Science and Engineering, 776, 012057 (2020). [CrossRef] [Google Scholar]
  26. D. Wojtkowiak, K. Talaśka, M. Berdychowski Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block. IOP Conferences: Materials Science and Engineering, 776, 012055 (2020). [CrossRef] [Google Scholar]
  27. M. Berdychowski, J. Mielniczuk Analysis of the porous bone-implant fixation-experimental verification of numerical model. MATEC Web of Conferences, 157, 05002 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  28. M. Berdychowski, J. Mielniczuk, M. Matyjaszczyk Analysis of the Yield Condition of Porous Bone-implant Fixation. Procedia Engineering, 177, 358–362 (2017). [CrossRef] [Google Scholar]
  29. M. Berdychowski, D. Wilczyński, K. Wałęsa, J. Górecki Research on the compaction process of loose materials with use of helix technology. IOP Conference Series: Materials Science and Engineering, 776, 012063 (2020). [CrossRef] [Google Scholar]
  30. D. Wojtkowiak, K. Talaśka The influence of the piercing punch profile on the stress distribution on its cutting edge. MATEC Web of Conferences, 254, 02001 (2019). [CrossRef] [EDP Sciences] [Google Scholar]
  31. D. Wojtkowiak, K. Talaśka Modelling the Belt Perforation Process with the Piercing Punch and the Die in Context of the Construction of the Punching Dies, IOP Conferences: Materials Science and Engineering, 647, 012013 (2019). [CrossRef] [Google Scholar]
  32. K. Talaśka, D. Wojtkowiak Modelling a mechanical properties of the multilayer composite materials with the polyamide core. MATEC Web of Conferences, 157, 02052 (2018). [CrossRef] [EDP Sciences] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.