Open Access
Issue |
MATEC Web Conf.
Volume 333, 2021
The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019)
|
|
---|---|---|
Article Number | 05003 | |
Number of page(s) | 6 | |
Section | Chemical Reaction Engineering | |
DOI | https://doi.org/10.1051/matecconf/202133305003 | |
Published online | 08 January 2021 |
- Arvajova, A. B., J. Brezina, R. Pecinka, and P. Koci; “Modeling of Two-Step CO Oxidation Light-off on Pt/γAl2O3 in the Presence of C3H6 and NOx,” Appl. Catal. B: Environ., 233, 167–174 (2018) [CrossRef] [Google Scholar]
- Badr, O. and S. D. Probert; “Sinks and Enviromental Impacts for Atmospheric Carbon Monoxide,” Appl. Energy, 50, 339–371 (1995) [CrossRef] [Google Scholar]
- Balenović, M.; Modeling and Model-Based Control of a Three-Way Catalytic Converter, PhD Dissertation, Technische Universiteit Eindhoven, Netherlands (2002) [Google Scholar]
- Barshad, Y. and E. Gulari; “A Dynamic Study of CO Oxidation on Supported Platinum,” AIChE J., 31, 649–658 (1985) [CrossRef] [Google Scholar]
- Budhi, Y. W., A. Jaree, J. H. B. J. Hoebink, and J. C. Schouten; “Simulation of Reverse Flow Operation for Manipulation of Catalyst Surface Coverage in the Selective Oxidation of Ammonia,” Chem. Eng. Sci., 59, 5365–5377 (2004) [CrossRef] [Google Scholar]
- Budhi, Y. W.; Reverse Flow Reactor Operation for Control of Catalyst Surface Coverage, PhD Dissertation, Technische Universiteit Eindhoven, Netherlands (2005) [Google Scholar]
- Campman, M. A. J.; Kinetics of Carbon Monoxide Oxidation Over Supported Platinum Catalyst, The Role of Steam in The Presence of Ceria, PhD Dissertation, Technische Universiteit Eindhoven, Netherlands (1996) [Google Scholar]
- Chen, I. C., J. Hill, R. Ohlemuller, and D. B. Roy; “Rapid Range Shifts of Species Associated with High Levels of Climate Warming,” Sci., 333, 1024–1026 (2011) [CrossRef] [Google Scholar]
- Engel, T. and G. Ertl; “Elementary Steps in the Catalytic Oxidation of Carbon Monoxide on Platinum Metals,” Adv. Catal., 28, 1–78 (1979) [Google Scholar]
- Kašpar, J., P. Fornasiero, and N. Hickey; “Automotive Catalytic Converters: Current Status and Some Perspectives,” Catal. Today, 77, 419–449 (2003) [CrossRef] [Google Scholar]
- Koltsakis, G. C., P. A. Konstatinidis, and A. M. Stamatelos; “Development and Application Range of Mathermatical Models for 3-Way Catalytic Converter,” Appl. Catal. B: Environ., 212, 161–191 (1997) [CrossRef] [Google Scholar]
- Nibbelke, R. H., M. A. J. Campman, J. H. B. J. Hoebink, and G. B. Marin; “Kinetic Study of the CO Oxidation over Pt/γ-Al2O3 and Pt/Rh/CeO2/γ-Al2O3 in the Presence of H2O and CO2,” J. Catal., 171, 358–373 (1997) [CrossRef] [Google Scholar]
- Nievergeld, A. J. L.; Automotive Exhaust Gas Conversion: Reaction Kinetics, Reactor Modelling and Control, PhD Dissertation, Technische Universiteit Eindhoven, Netherlands (1998) [Google Scholar]
- Patel, B. S. and K. D. Patel; “A Review Paper on Catalytic Converter for Automotive Exhaust Emission,” Int. J. Appl. Eng. Res., 7, 1398–1402 (2012) [Google Scholar]
- Raub, J. A., M. Mathieu-Nolf, N. B. Hampson, and S. R. Thom; “Carbon Monoxide Posoning–A Public Health Perspective,” Toxicol., 145, 1–14 (2000) [CrossRef] [Google Scholar]
- Scholz, K.; NOx Storage and Reduction over a Lean-Burn Automotive Catalyst, PhD Dissertation, Technische Universiteit Eindhoven, Netherlands (2006) [Google Scholar]
- Shelef, M. and R. W. McCabe; “Twenty-Five Years after Introduction of Automotive Catalysts: What Next?,” Catal. Today, 62 35–50 (2000) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.