Open Access
Issue |
MATEC Web Conf.
Volume 328, 2020
XXII. International Scientific Conference – The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2020 (AEaNMiFMaE-2020)
|
|
---|---|---|
Article Number | 01011 | |
Number of page(s) | 8 | |
Section | Measurement and Calculation of State Variables in the Fluid Flow | |
DOI | https://doi.org/10.1051/matecconf/202032801011 | |
Published online | 18 November 2020 |
- L. Jeroen l, A. van den Berg, Optimal routing in an automated storage/ retreival system with dedicated storage. IIE Transactions, 31, no. 5, 407–415 (1999) [Google Scholar]
- S. Li, D. He, Y Peng, A method for rack area zoning based on task cycle time in automated storage system. International Conference, Transportation Engineering. USA: American Society of Civil Engineers, 961–967 (2007) [Google Scholar]
- A. Dombrachev, A. Korshunov, B. Yakimovich. Based on complexity theory the automated normalization system of tool ing. equipment. Avtomatizatsiya i Sovremennye Tekhnologii, Issue 10, 3-8 (2004) [Google Scholar]
- T. Dodok, N. Cubonova, M. Císar, et al., Utilization of strategies to generate and optimize machining sequences in CAD/CAM. Conference 12th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport Location: High Tatras, Book Series Procedia Engineering, 192, 113-118 (2017) [Google Scholar]
- V. Tlach, Z. Ságová, I. Kuric, Circular and quasi-circular paths for the industrial robots measuring with the Renishaw Ballbar QC20-W, MATEC Web of Conferences. EDP Sciences. 254 (2017) [Google Scholar]
- I. Kuric, M. Cisar, V. Tlach, et al., Technical Diagnostics at the Department of Automation and Production Systems. Book Series Advances in Intelligent Systems and Computing, 835, 474-484 (2019) [CrossRef] [Google Scholar]
- N. Čuboňová, T. Dodok, Z. Ságová, Optimisation of the machining process using genetic algorithm. Scientific Journal of Silesian University of Technology. Series Transport 104 (2019) [Google Scholar]
- A. Elbakian, B. Sentyakov, P. Bozek, I. Kuric, K. Sentyakov, Automated Separation of Basalt Fiber and Other Earth Resources by the Means of Acoustic Vibrations. Acta Montanistica Slovaca, Volume 23, Issue 3, 271-281 (2018) [Google Scholar]
- R. Manzini, Warehousing in the Global Supply Chain. Advanced Models. Tools and Applications for Storage systems. London Springer-Verlag London Limited, 483-486, (2012) [Google Scholar]
- A. Korshunov, P. Kollár, Technological system for weight measurements in a logistic warehouse. Applied Mechanics and Materials, 11-18 (2015) [Google Scholar]
- T. Korbel, W. Bialy, S. Czerwiňski, Ocena stanu technicznego maszyn górniczych w oparciu o kryterium rozkładu Weibulla. Systemy Wspomagania w Inżynierii Produkcji. Górnictwo – perspektywy i zagrożenia. 1(13)/2016. 639-654 (2016) [Google Scholar]
- S. Gavlas, P. Ďurčanský, R. Lenhard and J. Jandacka, EPJ Web of Conferences 92, 02019 (2015) [CrossRef] [EDP Sciences] [Google Scholar]
- J. Jandacka, M. Holubcik, Š. Papucik, R. Nosek, Combustion of pellets from wheat straw, Acta Montanistica Slovaca, Volume 17, Issue 4, 289-283(2012) [Google Scholar]
- N. Kantova, M. Holubcik, J. Jandacka, A. Čaja, Comparison of particulate matters properties from combustion of wood biomass and brown coal, Procedia Engineering, Volume 192, pp. 420-416(2017) [CrossRef] [Google Scholar]
- M. Hollubcik, J. Jandacka, P. Durcansky, Energy Properties of Wood Pellets Made from the Unusual Woody Plants, AIP Conference Proceedings, Volume 1768 Article Number UNSP 020013 (2016) [CrossRef] [Google Scholar]
- Y. Turygin, J. Zubkova, D. Maga, Investigation of kinematic error in transfer mechanisms of mechatronic system. 15th International Conference on Mechatronics, Czech Republic; Prague (2012) [Google Scholar]
- N. Akatov, I. Klačková, Z. Mingaleva, G. Galieva, N. Shaidurova, Expert technology for risk management in the implementation of QRM in a high-tech industrial enterprise, In časopis: Management Systems in Production Engineering, Volume 27, Issue 4, 250-254 (2019) [CrossRef] [Google Scholar]
- I. Klačková, I. Zajačko, R. Lenhard, I. Gritsuk, D. Wiecek, Simulation of wood biomass combustion in hot water boiler, In Conference Machine Modelling and Simulations 2019, Liptovský Ján, In IOP Conference Series Materials Science and Engineering, Volume 776, 24th Slovak-Polish International Scientific Conference on Machine Modelling and Simulations - MMS 2019, 3-6 September 2019, Liptovský Ján, Slovakia (2019) [Google Scholar]
- I. Kuric, O. Gorobchenko, O. Litikova, I. Gritsuk, V. Mateichyk, K. Bulgakov, I. Klačková, Research of vehicle control informative functioning capacity, In Conference Machine Modelling and Simulations 2019, Liptovský Ján, In IOP Conference Series Materials Science and Engineering, Volume 776, 24th Slovak-Polish International Scientific Conference on Machine Modelling and Simulations - MMS 2019, 3-6 September 2019, Liptovský Ján, Slovakia (2019) [Google Scholar]
- B. Yakimovich, A. Korshunov, V. Sviatskii, Increasing of the Efficiency of Flexible Manufacturing System. In International Conference on Manufacturing Engineering and materials, ICMEM 2016, Nový Smokovec, Slovakia. Procedia Engineering, vol. 149, pp. 581-585, (2016) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.