Open Access
| Issue |
MATEC Web Conf.
Volume 306, 2020
The 6th International Conference on Mechatronics and Mechanical Engineering (ICMME 2019)
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 4 | |
| Section | Control Theory and Control Engineering | |
| DOI | https://doi.org/10.1051/matecconf/202030603005 | |
| Published online | 14 January 2020 | |
- Yin-Yen Kuo, Chiao-Hua Cheng and Shao-Kang Hung, “3D-Printed Linear Positioner with Micrometer Accuracy”, ICMME (2016) [Google Scholar]
- Hermes Giberti, Luca Sbaglia and Marco Silvestri “Mechatronic Design for an Extrusion-Based Additive Manufacturing Machine”, Machines, (2017) [Google Scholar]
- Husein Zilullah Toresano, La Ode And Prajitno, Prawito., “Design of 3-Axis Cartesian Robot Manipulator” (2017) [Google Scholar]
- I. Zabalza, J. Ros, J.J. Gil, J.M. Pintor, J.M. Jimenez, Tri-Scott. A new kinematic Structure for a 6-dof decoupled parallel manipulator, Workshop on fundamental issues and future research directions for parallelmechanisms and manipulators, pp.12–15, Québec, (2002). [Google Scholar]
- E Mirshekari, A Ghanbarzabeh, K Heidari Shirazi, Structure Comparison and Optimal Design of 6- RUS Parallel Manipulator Based on Kinematic and Dynamic Performances, LAJSS, Vol. 13, pp 2414 – 2438, 2016. [Google Scholar]
- Vázquez H. Jesús, Cuenca J. Francisco, Cinemática Inversa y Análisis Jacobiano del Robot Paralelo Hexa, Memorias Somim, Vol. 1, No. 4, pp 800–810, Septiembre, (2009), Sonora. México. [Google Scholar]
- A Zubizarreta, I Cabanes, E Portillo, D Orive, M Marcos Modelo dinamico de robots paralelos considerando sensorica redundante universidad del Pais Vasco 2006. [Google Scholar]
- M Díaz., H Quintero, L A Mejía, G Holguin, MH errera, C Mesa, G Daraviña ., Aplicación de los robots paralelos”, En Manipuladores paralelos: Síntesis, análisis y aplicaciones, Universidad Tecnológica de Pereira. [Google Scholar]
- A. Arian, B. Danaei, M. Tale-Masouleh, Kinematic and Dynamic Analyses of Tripteron, an Over-Constrained 3-DOF Translational Parallel Manipulator, through Newton-Euler Approach” AUT Journal of Modeling and Simulation, (2018), pp 61–70 [Google Scholar]
- J. Ruiz-García, D. Chaparro-Altamirano, R. Zavala-Yoe and R. Ramírez-Mendoza, Direct and Inverse Dynamics Modeling of a 6-PUS Parallel Robot, ICMEAE, Morelos, (2013), pp. 21–26. [Google Scholar]
- J. Uniyal, M. Joshi and P. K. Juneja, “Set point tracking capability and comparitive response of PI-PD controller with PI, PD and PID controller,” ICACCA (Spring), Dehradun, (2016), pp. 1–6. [Google Scholar]
- L. Jun, W. Xiaoguang, W. Yuqi and L. Qi, “Continuous terminal sliding mode control of a 6- DOF wire-driven parallel robot, ROBIO, Macau, (2017), pp. 1757–1762. [Google Scholar]
- Z. Caihong and Z. Hongtao, Dynamic Sliding Mode Control Applied in Parallel Robot System, DCABES, Wuxi, (2011), pp. 405–408. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.