Open Access
MATEC Web Conf.
Volume 271, 2019
2019 Tran-SET Annual Conference
Article Number 03005
Number of page(s) 5
Section Asphalt Concrete Materials
Published online 09 April 2019
  1. Moraes, R., Velasquez, R., and Bahia, H.U. (2011). Measuring the Effect of Moisture on Asphalt-Aggregate Bond with the Bitumen Bond Strength Test. Transportation Research Record: Journal of the Transportation Research Board, 2209(1), 70–81. [CrossRef] [Google Scholar]
  2. Yao, Z., Zhu, H., Gong, M., Yang, J., Xu, G., and Zhong, Y. (2017). Characterization of asphalt materials’ moisture susceptibility using multiple methods. Cons. & Bld. Mat, 155(30), 286–295. [CrossRef] [Google Scholar]
  3. Bhasin, A., Howson J.E., Masad, E., Little, D., and Lytton, R.L. (2007). Effect of modification processes on bond energy of asphalt binders. Transportation Research Record, 1988, 29–37. [CrossRef] [Google Scholar]
  4. Masad E., Zollinger C., Bulut R., Little D.N., and Lytton R.L. (2006). Characterization of HMA moisture damage using surface energy and fracture properties. Asphalt Paving Technology: Association of Asphalt Paving Technologists, 75, 713–48. [Google Scholar]
  5. Cho, D-W., Kim, K. (2010). The Mechanisms of Moisture Damage in Asphalt Pavement by Applying Chemistry Aspects. In KSCE Journal of Civil Engineering, 14(3), 333–342. [CrossRef] [Google Scholar]
  6. Little, D.N. and Jones, D.R. (2003). Chemical and Mechanical Processes of Moisture Damage in Hot-Mix Asphalt Pavements. Topic 2, National Seminar on Moisture Sensitivity of Asphalt Pavements, TRB Miscellaneous Report, ISBN 0-309-09450-X, 37–70. [Google Scholar]
  7. Santucci, L. (2010). Minimizing Moisture Damage in Asphalt Pavements. Pavement Technology Update, University of California Pavement Research Center, 2(2), 1–12. [Google Scholar]
  8. Hung, A.M. & Fini, E.H. (2015). AFM study of asphalt binder bee structures. RSC Adv., 5(117), 96972–96982. [CrossRef] [Google Scholar]
  9. Pauli, A.T., Branthaver, J.F., Robertson, R.E., and Grimes, W. (2001). Atomic force microscopy investigation of SHRP asphalts. ACS, Petroleum Preprints, 46(2), 110–114. [Google Scholar]
  10. Schmets, A., Kringos, N.A., Pauli, T., Redelius, P., and Scarpas, T. (2010). On the existence of wax-induced phase separation in bitumen. Int. J. of Pavement Eng, 11(6), 555–563. [CrossRef] [Google Scholar]
  11. Masson, J.F., Leblond, V., and Margeson, J. (2006). Bitumen morphologies by phase-detection atomic force microscopy. Journal of Microscopy, 221(1), 17–29. [CrossRef] [Google Scholar]
  12. Dourado, E.R., Simao, R.A., and Leite, L.F.M. (2012). Mechanical properties of asphalt binders evaluated by atomic force microscopy. Journal of Microscopy, 245(2), 119–128. [Google Scholar]
  13. Fischer, H., Stadler, H., and Erina, N. (2013). Quantitative temperature-depending mapping of mechanical properties of bitumen at the nanoscale using the AFM operated with PeakForce Tapping™ mode. Journal of Microscopy, 250(3), 210–217. [CrossRef] [Google Scholar]
  14. Nahar, S.N., Schmets, A.J.M., Schitter, G., and Scarpas, A. (2014). Quantitative nanomechanical property mapping of bitumen micro-phases by peak-force atomic force microscopy. Presented at 12th ISAP Conference on 30 Asphalt Pavements, Raleigh, N.C. [Google Scholar]
  15. Rashid, A.F., and Hossain, Z. (2016). Morphological and nanomechanical analyses of ground tire rubber-modified asphalts. Innovative Infrastructure Solutions, 1(1), 36. [CrossRef] [Google Scholar]
  16. Rashid, F., Hossain, Z., & Bhasin, A. (2017). Nanomechanistic properties of reclaimed asphalt pavement modified asphalt binders using an atomic force microscope. Int. J. of Pav. Eng., 1–9. [Google Scholar]
  17. Tarefder, R.A. and Arifuzzaman, M. (2011). A study of moisture damage in plastomeric polymer modified asphalt binder using functionalized AFM tips. Sys., Cyb, & Inf., 9(5), 1–12. [Google Scholar]
  18. Das, P.K., Kringos, N., Wallqvist, V., and Birgisson, B. (2013). Micromechanical investigation of phase separation in bitumen by combining atomic force microscopy with differential scanning calorimetry results. Road Materials and Pavement Design, 14(2), 25–37. [CrossRef] [Google Scholar]
  19. Yu, X., Burnham, N.A., Mallick, R.B., & Tao, M. (2013). A systematic AFM-based method to measure adhesion differences between micron-sized domains in asphalt binders. Fuel, 113(9), 443–447. [CrossRef] [Google Scholar]
  20. Arifuzzaman, M., Islam, M.S., & Hossain, M.I. (2017). Moisture damage evaluation in SBS and lime modified asphalt using AFM and artificial intelligence. Neu. Com. & App., 28(125), 1–10. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.