Open Access
| Issue |
MATEC Web Conf.
Volume 223, 2018
The 12th International Conference on Axiomatic Design (ICAD 2018)
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/201822301006 | |
| Published online | 29 October 2018 | |
- O. Kuzgunkaya, H. ElMaraghy, “Economic and Strategic Justification of Changeable, Reconfigurable and Flexible Manufacturing”, Changeable and Reconfigurable Manufacturing Systems, Springer, pp 303-320, (2009) [CrossRef] [Google Scholar]
- N. Ganguli, C. Burns, R. Goldsberry, Supplying the future of mobility. Deloitte, (2018). Accessed April 1, 2018. https://www2.deloitte.com [Google Scholar]
- G. StalkJr., T.M. Hout, Competing Against Time: How Time-Based Competition is Reshaping Global Markets, Simon and Schuster (1990) [Google Scholar]
- G. Zhang, R. Liu, L. Gong, and Q. Huang, “An Analytical Comparison on Cost and Performance among DMS, AMS, FMS and RMS”, Reconfigurable manufacturing systems and transformable factories, pp. 659-673 (2006) [CrossRef] [Google Scholar]
- E. Puik, D. Ceglarek, “Axiomatic Product Design in three Stages; A constituent roadmap that visualises the status of the design process by tracking the knowledge of the designer”, IMECE 15 (2015) [Google Scholar]
- E. Puik, D. Telgen, L.V. Moergestel, and D. Ceglarek, “Assessment of Reconfiguration Schemes for Reconfigurable Manufacturing Systems Based on Resources and Lead Time”, RCIM 43, pp. 30-38, (2017) [Google Scholar]
- M. Stäbler, J. Weber, K. Paetzold, “Adapt!Evaluation - Evaluation for Design and Re-Design of Production Systems based on Axiomatic Design, ICAD (2017) [Google Scholar]
- J. Weber, D. Förster, M. Stäbler, K. Paetzold, “Adapt!-Agile Project Management Supported by Axiomatic Design”, ICAD (2017) [Google Scholar]
- K.T. Ulrich, “The role of product architecture in the manufacturing firm”, Research Policy 24(3), pp.419-440 (1995) [CrossRef] [Google Scholar]
- M. Jacobs, C. Droge, S.K. Vickery, R.R. Calantone “Product and process modularity's effects on manufacturing agility and firm growth performance”, Prod. Innov. Manag. 28(1), pp.123-137. (2011) [CrossRef] [Google Scholar]
- F.E. Henriques, P.A. Cauchick Miguel, “Use of product and production modularity in the automotive industry: a comparative analysis of vehicles developed with the involvement of Brazilian engineering centers”, Gest. Prod. 24 pp.161-177 (2017) [CrossRef] [Google Scholar]
- C.Y. Baldwin, K.B. Clark, Design rules The Power of Modularity 1, MIT Press (2000) [Google Scholar]
- Y. Koren et al. “Reconfigurable Manufacturing Systems”, CIRP 48 pp. 527-540 (1999) [Google Scholar]
- E. Puik, D. Ceglarek, “Guidelines for Application of the Constituent Roadmap of Product Design Based on Axiomatic Design”, ICAD (2017) [Google Scholar]
- G. Erixon, Modular Function Deployment - A Method for Product Modularisation, Ph.D. Thesis, The Royal Institute of Technology, Stockholm (1998) [Google Scholar]
- W. Herlyn, PP im Automobilbau, Hanser Fachbuchverlag (2012) [CrossRef] [Google Scholar]
- J. Ihme, Logistik im Automobilbau, Carl Hanser Verlag GmbH & Co. KG (2006) [CrossRef] [Google Scholar]
- N.P. Suh, The principles of design, Oxford University Press (1990) [Google Scholar]
- N.P. Suh, Axiomatic design: Advances and applications, Oxford University Press (2001) [Google Scholar]
- Weber, J. Förster, D., Kößler, J., Paetzold, K., “Design of changeable production units within the automotive sector with Axiomatic Design”, ICAD (2015) [Google Scholar]
- K. Schwaber, J. Sutherland, The Scrum Guide (2016) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.