Open Access
Issue
MATEC Web Conf.
Volume 175, 2018
2018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
Article Number 02030
Number of page(s) 5
Section Building Equipment Automation
DOI https://doi.org/10.1051/matecconf/201817502030
Published online 02 July 2018
  1. Chen Ming. Numerical simulation of flow field and temperature field of sleeve type hot blast furnace [D]. Northeastern University,2011. [Google Scholar]
  2. Guo Lanlan. Design and implementation of control system of hot air stove [D]. Beijing university of chemical technology,2017. [Google Scholar]
  3. Zhou Handong. Numerical simulation and strength analysis of flow field of sleeve type hot air furnace [D]. Northeastern University,2010. [Google Scholar]
  4. Liang Huanhuan. Optimization design and research on combustion control system of hot air furnace [D]. Xi 'an university of architecture and technology,2016. [Google Scholar]
  5. Zhou Huigan, Sun Songlin, Siao Mingtao, Cao Lin, He Shao-Ming, Zou Nan. Based on the PID algorithm, the thermal wind temperature control and simulation analysis of hot air stove [J]. Chinese agricultural bulletin,2016,32(15):182-186. [Google Scholar]
  6. Gao Qiang. Experimental study on optimization of biomass hot blast furnace and simulation of heat exchanger temperature field [D]. Harbin Institute of Technology,2016. [Google Scholar]
  7. Liu Piliang, Yang Wei, Cui Guimei. Application of PID parameter self-tuning method in combustion control of hot air furnace [J]. Computer measurement and control,2015,23(3):805-808. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.