Issue |
MATEC Web Conf.
Volume 175, 2018
2018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
|
|
---|---|---|
Article Number | 02030 | |
Number of page(s) | 5 | |
Section | Building Equipment Automation | |
DOI | https://doi.org/10.1051/matecconf/201817502030 | |
Published online | 02 July 2018 |
Optimization and control of working parameters of hot blast furnace
336 West Road Jinan, School of Mechanical Engineering, University of Jinan, Jinan 250022, Shandong Province, China
In order to improve the working efficiency of hot blast stoves, reduce environmental pollution, reduce labor intensity and improve combustion efficiency, this paper uses ANSYS software to simulate the temperature field and flow field of the hot blast stove, and uses the PID controller to realize the automatic control of the hot blast stove. The model and working principle of the hot blast stove are briefly introduced. The operating parameters (blowing fan air flow, coal intake) of the hot blast stove are briefly studied. The results show that the amount of air flow of the blast furnace depends on the coal intake of the hot blast stove, which is generally per kilogram of coal. 8m3-10m3- air is required. When the coal intake is 120kg/h and the air volume of the blower is 1200m3/h, the hot blast stove can work stably with high efficiency. The results obtained are input into the database for later combustion. The work provides a theoretical basis.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.