Issue |
MATEC Web Conf.
Volume 175, 2018
2018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
|
|
---|---|---|
Article Number | 02024 | |
Number of page(s) | 4 | |
Section | Building Equipment Automation | |
DOI | https://doi.org/10.1051/matecconf/201817502024 | |
Published online | 02 July 2018 |
Analysis of temperature field of grain and drying medium for grain drying integrated mechanical device.
School of Mechanical Engineering, University of Jinan, Jinan 250022, Shandong Province, China
*
Corresponding author : 87756997@qq.com
In order to improve the working efficiency of the drying tower and the hot blast stove in the process of grain drying, this paper proposes a method to solve the problems of air pollution and energy waste caused by excessive combustion or insufficient combustion of the hot blast stove. Based on finite element analysis, this paper uses ANSYS software to simulate the drying process of grain. This paper briefly introduces the grain drying device model and working mechanism, analyzes the temperature field of the drying device, and studies the influence on the drying effect of the working parameters (hot water, hot air, hot air hot blast stove combustion temperature) during the grain drying process. The results show that the hot air temperature is 85°C, the hot water temperature is 90°C, the combustion chamber temperature is 480°C, the grain drying effect is good, the combustion efficiency of the combustion furnace is the best, and the energy utilization rate is the highest.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.