Open Access
| Issue |
MATEC Web Conf.
Volume 249, 2018
2018 5th International Conference on Mechanical, Materials and Manufacturing (ICMMM 2018)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 4 | |
| Section | Mechanical Engineering and Digital Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201824903002 | |
| Published online | 10 December 2018 | |
- L. N. López de Lacalle, A. Lamikiz, J. A. Sánchez and J. L. Arana, The effect of ball burnishing on heat-treated steel and Inconel 718 milled surfaces. Int J Adv Manuf Technol (2007) 32: 958–968. [CrossRef] [Google Scholar]
- S. Fang-Jung, CH. Chuing-Hsiung, Precision surface finish of the mold steel PDS5 using an innovative ball burnishing tool embedded with a load cell. Precision Engineering 34 (2010) 76-84. [CrossRef] [Google Scholar]
- Fang-Jung Shiou, Chih-Cheng Hsu, Surface finishing of hardened and tempered stainless tool steel using sequential ball grinding, ball burnishing and ball polishing processes on a machining centre, Journal of Materials Processing Technology, Volume 205, Issues 1–3, 2008, Pages249-258. [CrossRef] [Google Scholar]
- W. Bouzid, O. Tsoumarev, K. Sai, An investigation of surface roughness of burnished AISI 1042 steel. Int J Adv Manuf Technol (2004) 24: 120–125. [Google Scholar]
- M. Nemat, A. C. Lyons, An investigation of the surface topography of ball burnished mild steel and aluminium. Int J Adv Manuf Technol 16:469–473 (2000). [CrossRef] [Google Scholar]
- L. Luca, S. Neagu-Ventzel, I. Marinescu, Effects of working parameters on surface finish in ballburnishing of hardened steels. Precision Engineering 29 (2005) 253-256 2007. [CrossRef] [EDP Sciences] [Google Scholar]
- Rodríguez, L.N. López de Lacalle, A. Celaya, A. Lamikiz, J. Albizuri, Surface improvement of shafts by the deep ball-burnishing technique. Surface & Coatings Technology 206 (2012) 2817–2824. [CrossRef] [Google Scholar]
- Shepard, M.J., Prevey, P.S. and Jayaraman, N, 2003, “Effects of Surface Treatment on Fretting Fatigue Perfomance of Ti-6Al-4V,” Proceedings of the 8th National Turbine Engine High Cycle Fatigue (HCF) Conference, April 14-16, Monterey, CA. [Google Scholar]
- L.N. López de Lacalle, A. Lamikiz, J. Muñoa, J.A. Sánchez, Quality improvement of ball-end milled sculptured surfaces by ball burnishing. International Journal of Machine Tools & Manufacture 45 (2005) 1659–1668. [CrossRef] [Google Scholar]
- S. Swirad - Surface texture characterization of alpha-beta titanium alloy (Ti6-Al4-V) after hydrostatic burnishing, MATEC Web of Conferences 189, 01001 (2018),MEAMT 2018 [Google Scholar]
- Rodríguez, L.N. López de Lacalle, A. Celaya, A. Lamikiz, J. Albizuri, Surface improvement of shafts by the deep ball-burnishing technique. Surface & Coatings Technology 206 (2012) 2817–2824. [CrossRef] [Google Scholar]
- Goutam D. Revankar, Raviraj Shetty, Shrikantha S. Rao, Vinayak N. Gaitonde, Analysis of surface roughness and hardness in ball burnishing of titanium alloy, Measurement, Volume 58, 2014, 256-268. [CrossRef] [Google Scholar]
- Turgay Kıvak, Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts, Measurement, Volume 50, 2014, Pages19-28 [CrossRef] [Google Scholar]
- İlhan Asiltürk, Harun Akkuş, Determining the Effect of Cutting Parameters on Surface Roughness in Hard Turning Using the Taguchi Method, Measurement 44(9):1697-1704, (2011) [Google Scholar]
- Manivel, D., and R. Gandhinathan. Optimization of surface roughness and tool wear in hard turning of austempered ductile iron (grade 3) using Taguchi method. Measurement 93,108-116, (2016) [CrossRef] [Google Scholar]
- S. Krishna Madhavi, D. Sreeramulu, M. Venkatesh, Evaluation of Optimum Turning Process of Process Parameters Using DOE and PCA Taguchi Method, Materials Today: Proceedings, Volume 4, Issue 2, Part A,2017, Pages 1937-1946. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.