EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 150 (2018) MATEC Web of Conferences, 150 (2018) 03001 References
Open Access
Issue
MATEC Web of Conferences
Volume 150, 2018
Malaysia Technical Universities Conference on Engineering and Technology (MUCET 2017)
Article Number 03001
Number of page(s) 6
Section Civil Engineering
DOI https://doi.org/10.1051/matecconf/201815003001
Published online 23 February 2018
  1. American Building Institution, Building Code Requirement for Structural Concrete (ACI 318-11). Farmington Hills: ACI 318-11 (2011) [Google Scholar]
  2. Cao Chen, Jan Nemcik, Ren Ting, & Naj Aziz, International Journal of Mining Science and Technology,23(1) pp. 79-88 (2013) [CrossRef] [Google Scholar]
  3. Chanakya A, Design of Structural Elements: Concrete, Steelwork, Masonry, and Timber Designs to British Standards and Eurocodes. Third Edition. New York: Taylot & Francis,87(2009), pp. 1069 – 1064 .(2009) [Google Scholar]
  4. Chuka, Chinwko Emmanuel, Odio.B.O Chukwuneke J. L Sinebe J. E, Investigation Of The Effect Of Corrosion On Mild Steel In Five Different Environments, International of journal scientific and technology research vol.3 (issue 7.)pp. 306-310 (2014) [Google Scholar]
  5. D. A. Winful, K.A. Cashell, A. M. Barnes & R. J. Pargeter, High Strength Steel in Fire (2015) [Google Scholar]
  6. Eligehausen, R., Mallee, R. and Silva, J Anchorage in Concrete Construction, Ernst & Sohn: A Wiley Company (2006) [Google Scholar]
  7. Glenn P.Peterson, Pullout testing of cast-in-place. Brigham Young University:Master, thesis. (1998) [Google Scholar]
  8. John G. Shipp And Edward R. Haninger, Design of Headed Anchor Bolts. Engineering Journal, 20(2), pp. 58-69 (1983) [Google Scholar]
  9. Konstantinos Daniel Tsavdaridis, Mohamed A. Shaheen b, Charalampos Baniotopoulos c & EmadSalem, Analytical approach of anchor rod stiffness and steel base plate calculation under tension, 6, pp. 207-218. (2016) [Google Scholar]
  10. Maria Teresa Gomes Barbosa & Souza Sánchez Filho. Investigation of Bond Stress in Pull Out Specimens with High Strength Concrete..Journal of Researches in Engineering Civil And Structural Engineering, 13(3), pp. 55-64. (2013) [Google Scholar]
  11. Marko Pavlović, Zlatko Marković, Milan Veljković & Dragan Buđevac Paredis, J. Bolted shear connectors vs. headed studs behaviour in push-out test Constructional Steel Research, 88,pp. 134-149 (2013) [Google Scholar]
  12. Muhammad Saleem & Tatsuya Tsubaki, Two-Layer Model For Pull-Out Behav-Ior Of Post-Installed Anchor, Journal of Japan and Society,8(1) pp. 49-62 (2012) [Google Scholar]
  13. Razaqpur A.G., S. Foo, A. Mostafa and M. Saatcioglu, Sesimic Respose Of Three Types Of Post-Installed Anchors In, World Conference on Earthquake Engineering (2008). [Google Scholar]
  14. Robert H. Lesage (Ed.) Cast-in-place and drop-in anchor. Washington D.C: The Aberdeen Group (1971) [Google Scholar]
  15. R.W.Cannon, D.A. Godfrey, F. L Moreadith, Guide To The Design Of Anchor Bolt and Other Steel Embedments. Concrete International. (1981) [Google Scholar]
  16. S. A. Al-Ta'an & A. A. Mohammed, Tensile Strength of Short Headed Anchors Embedded in Steel Fibrous Concrete. Civil engineering, Iraq. pp 35-49 (2009) [Google Scholar]
  17. Sato Hiroshi, Kazunori fujikake & Sidney mindess, Study On Dynamic Pullout Strength Of Anchors Based On Failure Modes.13th World Conference on Earthquake Engineering(854) (2004) [Google Scholar]
  18. Seira Owa, Yasutoshi Yamamoto, Tatsuya Kondo & Christian Fogstad, Study on Strength and Ductility of Post-installed Adhesive Anchoring System. 15WCEE / 15th World Conference on Earthquake Engineering, Lisbon (2012) [Google Scholar]
  19. Sheikh Abdul Muhaimin, Anchor Bolt Position In Base Plate In Term Of “T” and “J” Anchor Bolt. University Tun Hussien Onn Malaysia:Degree.Thesis (2016) [Google Scholar]
  20. X. Fu and D.D.L. Chung, Sensitivity Of The Bond Strength To The Structure Of The Interface Between Reinforcement And Cement, And The Variability Of This Structure. Cement and Concrete Research, 28(6), pp. 787–793, (1998) [CrossRef] [Google Scholar]
  21. Williams Form Engineering, Cast-in-Place Concrete Anchors. Portland: Pigtail anchor bolt (2011) [Google Scholar]
  22. Wooyoung Jung, Minho Kwon, Kim Jinsup, and Buseog Ju. Performance E valuation of the Post-Installed Anchor for Sign Structure, Construction and Building Materials, 40 (12), pp. 496-506. (2013) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.