Open Access
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
Article Number 01011
Number of page(s) 4
Section Session 1 : Materials & Pathologies
Published online 14 February 2018
  1. J.S. Damtoft, J. Lukasik, D. Herfort, D. Sorrentino, E.M. Gartner, “Sustainable development and climate change initiatives”,Cem. Concr. Res. 38 (2) 115–127 (2008) [CrossRef] [Google Scholar]
  2. E.M. Gartner,” Industrially interesting approaches to “low-CO2” cements”,Cem. Concr. Res. 34, 1489–1498, (2004). [CrossRef] [Google Scholar]
  3. M.C.G. Juenger, F. Winnefeld, J.L. Provis, J.H. Ideker, “Advances in alternative cementitious binders”, Cem. Concr. Res. 41, 1232–1243, (2011). [CrossRef] [Google Scholar]
  4. M. Carmen Martín-Sedeño, A.J.M. Cuberos, A. G. De la Torre, G.Álvarez-Pinazo, L. M. Ordónez; MilenGateshkic, M.A.G. Aranda. “Aluminum-rich belitesulfoaluminate cements: Clinkering and early age hydration”.Cem.Concr. Res. Volume 40, (3), March 359–369, (2010). [CrossRef] [Google Scholar]
  5. K. Morsli, A.G. de la Torre, M. Zahir, M.A.G. Aranda. “Mineralogical phase analysis of alkali and sulfate bearing belite rich laboratory clinkers”.Cem.Concr. Res., 37 639–646, (2007) [CrossRef] [Google Scholar]
  6. N.Sundius, Peterson (1960) “Doppelvereinigung von Sulfat und SilikataussogenanntenSulfatringen in den Zementtfen in Limnham”.Radex-Rundschau. 100-103 (1960). [Google Scholar]
  7. M.W. Pryce “Calcium sulphosilicate in lime-kiln wall coating”. Min Mag 38:968-971, (1972) [CrossRef] [Google Scholar]
  8. M.Marroccoli, F.Montagnaro,M.L. Pace, A. Telesca, G.L. Valenti, “Synthesis of calcium sulfoaluminate cements from blends of coal combustion ashes with flue gas desulfurization gypsum”, PTSE, Ischia, Italy, 2010. [Google Scholar]
  9. Y.B. Pliego-Cuervo, F.P. Glasser, “The role of sulphates in cement clinkering: subsolidus phase relations in the system CaO−Al12O3−SiO2−SO3”.Cem.Concr. Res., 9, 51–56, (1979). [CrossRef] [Google Scholar]
  10. F.Bullerjahn, D.Schmitt, &M.BenHaha, “Effect of raw mix design and of clinkering process on the formation and mineralogical composition of (ternesite) belite calcium sulphoaluminate ferrite clinker”.Cem.Concr. Res., 59, 87-95, (2014). [CrossRef] [Google Scholar]
  11. E. Irran, E. Tillmanns, and G. Hentschel.“Ternesite, Ca5(SiO4)2SO4, a new mineral from the EttringerBellerberg/Eifel, Germany” Mineralogy and Petrology 60:121-132, (1997). [CrossRef] [Google Scholar]
  12. B. Dickens,WE. Brown “The crystal structure of Cas(PO4)2SiO4 (silico-carrlotite)”.Tschermaks Min Petr Mitt 16:1-27, (1971). [CrossRef] [Google Scholar]
  13. PD. Brotherton,JM Epstein, MW.Pryce,AH.White “Crystal structure of 'calcium sulphosilicate', Ca5(SiO4)2SO4”.Aust J Chem 27:657-660, (1974). [CrossRef] [Google Scholar]
  14. N. Sherman, J. Beretka, L.Santoro and G.L. Valenti“Long-term behaviour of hydraulic binders based on calcium sulfoaluminate and calcium sulfosilicate”Cem. Concr.Res, Vol. 25. No. 1, pp. 113-126,1995 [CrossRef] [Google Scholar]
  15. Su, Muzhen, W.Kurdowski, F. Sorrentino, Developpement in non Portland cements”. IX. ICCC, Vol.1, p.317, New Delhi (1992). [Google Scholar]
  16. Sahu,“Developpements in Low energy cements”. Ceramics-Silikáty.38 l91-, (1994) [Google Scholar]
  17. W. Gutt, M.A. Smith, “A new calcium silicosulphate,” Nature 210, 408–409, (1966). [CrossRef] [Google Scholar]
  18. W. Gutt, M.A. Smith, “Studies of sub-system CaO-CaO. SiO2-CaSO4, Trans Br.”Ceram.Soc. 66 557-567, (1967). [Google Scholar]
  19. T. Hanein, I. Galan, F. P. Glasser, S.Skalamprinos, A. Elhoweris, M.S. Imbabi, M.N. Bannerman, “Stability of ternesite and the production at scale of ternesite-based clinkers,”Cem. Concr. Res. 98, 91–100 (2017) [CrossRef] [Google Scholar]
  20. F. Bullerjahn, D. Schmitt, M. B. Haha, “Method for producing ternesite,” US9073785 B2 (2015). [Google Scholar]
  21. W. Dienemann, D. Schmitt, F. Bullerjahn, “Belite-calciumsulfoaluminate-ternesite (BCT)-a new low carbon clinker technology,”Cem. Int. 11, 100–109, (2013). [Google Scholar]
  22. Gang-Soon Choi and F.P. Glasser“The sulphur cycle in cement kilns: vapour pressures and solid-phase stability of the sulphate phases”Cem. Concr. Res. 18, . 367-374, (1988) [CrossRef] [Google Scholar]
  23. J. Strigac, S. Sahu, M. Lopasovska, R. Durovcikova, V. Kovar, J. Majling, Phase Compatibility in the system CaO-SiO2-Al2O3-SO3,” Ceramics 42 90–98, (1998). [Google Scholar]
  24. I.Kaprálik, F.Hanic,“Phase changes in the system CaO-SiO2-Al2O3-Fe2O3 MgO-CaSO4-K2SO4 in air up to 1300°C referred to sulphoaluminate cement clinker”Br.Ceram.Trans.J. 85, l3l (1986) [Google Scholar]
  25. J.Beretka, L.Santoro, N.Sherman, G.L.Valenti, “Synthesis and properties of low energy cements base don C4A3s”. XI. ICCC, Vol.3, p.195, New Delhi 1992 [Google Scholar]
  26. M. B. Haha, F.Bullerjahn, MaciejZajac“On the reactivity of ternesite” 14th ICCC, Pekín 2015 [Google Scholar]
  27. Frank Bullerjahn • MaciejZajac •M.B. Haha “CSA raw mix design: effect on clinker formation and reactivity” Materials and Structures 48:3895–3911, (2015) [CrossRef] [Google Scholar]
  28. M. Montes; M.T.Blanco Varela “Can calcium aluminates activate ternesite hydration?”Cem. Concr.Res. 103, 204-2015 (2018). [CrossRef] [Google Scholar]
  29. B. Raab, H. Poellmann, “Heat flow calorimetry and SEM investigations to characterize the hydration at different temperatures of different 12CaO·Al2O3 (C12A7) samples synthesized by solid state reaction, polymer precursor process and glycine nitrate process Thermochimica”Acta 513, 106–111, (2011). [Google Scholar]
  30. M.J. Sánchez-Herrero, A. Fernández-Jiménez, A.Palomo, “C4A3Ŝ hydration in different alkaline media,”Cem.Concr.Res. 46, 41-49, (2013). [CrossRef] [Google Scholar]
  31. S.R. Klaus, J. Neubauer, F. Goetz-Neunhoeffer, “Hydration kinetics of CA2 and CAInvestigations performed on a synthetic calcium aluminate cement,”Cem.Concr.Res. 43 62–69, (2013). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.