| Issue |
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
|
|
|---|---|---|
| Article Number | 01023 | |
| Number of page(s) | 6 | |
| Section | Session 1 : Materials & Pathologies | |
| DOI | https://doi.org/10.1051/matecconf/201814901023 | |
| Published online | 14 February 2018 | |
The benefic effect of Moroccan oil shale’s ash on blended cement (CMII)
Mohammed V University, Faculty of Science, Department of chemistry, Rabat, Morocco
Recycling of Tarfaya’s oil shales (OSA) was conducted for two essential reasons: First, to follow the change of their mineralogical composition with the heat treatment and second to investigate the possibility of their use in building materials. The mineral compositions and the mineralogical transformations of the oil shale during their thermal treatment were followed respectively by X-ray fluorescence (XRF), by X-ray diffraction analysis (XRD) and Fourier transform infrared (FTIR). The XRF showed that the mineral composition of the ash burned at 850°C is similar to that of Portland clinker and the DRX showed the presence of quartz, mayenite, gehlenite, anydrite, hematite and lime as well as the existence of some characteristics phases of the clinker as C2S, C3A and C4AF. The Infrared spectrum showed the various functional groups that exist in OSA. The substitution of cement CMII by OSA increased the content of free lime and Blaine specific surface. The ash influenced beneficially the mechanical strength of the blended cement. The best results were obtained at all times of curing (2, 7, 28 and 91 Days) for the substitution of CMII by 7 and 10 % of OSA.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.