Dry Friction Clutch Disc of an Automobile under Transient Thermal Load: A Comparison of Friction Lining Materials

Anosh Ali; Liaqat Ali; Samiur Rahman Shah; Mushtaq Khan; Syed Husain Imran; Shahid Ikramullah Butt

doi:10.1051/matecconf/201712407003

All issues

Volume 124 (2017)

MATEC Web Conf., 124 (2017) 07003

References

Open Access

Issue		MATEC Web Conf. Volume 124, 2017 2017 6^th International Conference on Transportation and Traffic Engineering (ICTTE 2017)


Article Number		07003
Number of page(s)		5
Section		Vehicle Design and Manufacturing Engineering
DOI		https://doi.org/10.1051/matecconf/201712407003
Published online		29 September 2017

Oday I. Abdullah, Josef Schlattmann Thermal behavior of friction clutch disc based on uniform pressure and uniform wear assumptions Friction 4 2016 228–237 [CrossRef] [Google Scholar]
Y.H. Jang, S.-h. Ahn Frictionally-excited thermoelastic instability in functionally graded material Wear 262 2006 1102–1112 [CrossRef] [Google Scholar]
O.I. Abdullah, J. Schlattmann The Effect of Disc Radius on Heat Flux and Temperature Distribution in Friction Clutches Journal of Advanced Materials Research 505 2012 154–164 [CrossRef] [Google Scholar]
R. Biczó, G. Kalácska Composite Friction Materials for Brakes and Clutches Scientific Bulletin, Tribology 2016 2016 21–26 [Google Scholar]
Piotr GRZEŚ, “Finite Element Analysis of disc temperature during braking process”, acta mechanica et automatica, 3, (2009). [Google Scholar]
M.A. Maleque, A. Atiqah New natural fibre reinforced aluminium composite for automotive brake pad International journal of mechanical and materials engineering 7 2012 166–170 [EDP Sciences] [Google Scholar]
Priyanka S. Bankar, S.N. Khan A Review Paper on Composite Brake Friction Lining for lining Applications on Band Brake IJEERT 2 2014 116–122 [Google Scholar]
K.O. Yathish, L.R. Arun Performance Analysis And Material Optimization Of Disc Brake using Mmc IJIRSET 2 2013 4101–4108 [Google Scholar]
M. G. Jacko, S.K. Rhee, Brake Linings and Clutch Facings, Kirk-Othmer Encyclopedia of Chemical Technology, (2000). [Google Scholar]
E. Mouffak, M. Bouchetara Transient thermal behavior of automotive dry clutch discs by using Ansys software Mechanika 22 6 2016 562–570 [EDP Sciences] [Google Scholar]
Oday I. Abdullah, J. Schlattmann Effect of Band Contact on the Temperature Distribution for Dry Friction Clutch International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 6 2012 [Google Scholar]
T.C. Kennedy, S. Traiviratana Transient Effects on Heat Conduction in Sliding Bodies IJCM 47 2007 57–77 [Google Scholar]
Faramarz Talati, Salman Jalalifar Analysis of heat conduction in a disk brake system Heat Mass Transfer 45 2009 1047–1059 [CrossRef] [Google Scholar]
O.I. Abdullah, J. Schlattmann Stresses and Deformations Analysis of a Dry Friction Clutch System Tribology in Industry 35 2013 155–162 [Google Scholar]
O.I. Abdullah, J. Schlattmann Thermo-mechanical Analysis of the Dry Clutches under different Boundary Conditions Tribology in Industry 36 2014 172–180 [Google Scholar]
O.I. Abdullah, J. Schlattmann, “Contact Analysis of a Dry Friction Clutch System”, ISRN, 2013, ID 495918, (2013). [Google Scholar]
W. Nowacki, W. Nowacki Thermoelasticity 1962 Pergamon Press Oxford (UK) [Google Scholar]
Oday I. Abdullah, Josef Schlattmann An Investigation Into the Thermal Behavior of the Grooved Dry Friction Clutch Journal of Tribology 136 2014 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Oday I. Abdullah, Josef Schlattmann Thermal behavior of friction clutch disc based on uniform pressure and uniform wear assumptions Friction 4 2016 228–237 [CrossRef] [Google Scholar]

[2] Y.H. Jang, S.-h. Ahn Frictionally-excited thermoelastic instability in functionally graded material Wear 262 2006 1102–1112 [CrossRef] [Google Scholar]

[3] O.I. Abdullah, J. Schlattmann The Effect of Disc Radius on Heat Flux and Temperature Distribution in Friction Clutches Journal of Advanced Materials Research 505 2012 154–164 [CrossRef] [Google Scholar]

[4] R. Biczó, G. Kalácska Composite Friction Materials for Brakes and Clutches Scientific Bulletin, Tribology 2016 2016 21–26 [Google Scholar]

[5] Piotr GRZEŚ, “Finite Element Analysis of disc temperature during braking process”, acta mechanica et automatica, 3, (2009). [Google Scholar]

[6] M.A. Maleque, A. Atiqah New natural fibre reinforced aluminium composite for automotive brake pad International journal of mechanical and materials engineering 7 2012 166–170 [EDP Sciences] [Google Scholar]

[7] Priyanka S. Bankar, S.N. Khan A Review Paper on Composite Brake Friction Lining for lining Applications on Band Brake IJEERT 2 2014 116–122 [Google Scholar]

[8] K.O. Yathish, L.R. Arun Performance Analysis And Material Optimization Of Disc Brake using Mmc IJIRSET 2 2013 4101–4108 [Google Scholar]

[9] M. G. Jacko, S.K. Rhee, Brake Linings and Clutch Facings, Kirk-Othmer Encyclopedia of Chemical Technology, (2000). [Google Scholar]

[10] E. Mouffak, M. Bouchetara Transient thermal behavior of automotive dry clutch discs by using Ansys software Mechanika 22 6 2016 562–570 [EDP Sciences] [Google Scholar]

[11] Oday I. Abdullah, J. Schlattmann Effect of Band Contact on the Temperature Distribution for Dry Friction Clutch International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 6 2012 [Google Scholar]

[12] T.C. Kennedy, S. Traiviratana Transient Effects on Heat Conduction in Sliding Bodies IJCM 47 2007 57–77 [Google Scholar]

[13] Faramarz Talati, Salman Jalalifar Analysis of heat conduction in a disk brake system Heat Mass Transfer 45 2009 1047–1059 [CrossRef] [Google Scholar]

[14] O.I. Abdullah, J. Schlattmann Stresses and Deformations Analysis of a Dry Friction Clutch System Tribology in Industry 35 2013 155–162 [Google Scholar]

[15] O.I. Abdullah, J. Schlattmann Thermo-mechanical Analysis of the Dry Clutches under different Boundary Conditions Tribology in Industry 36 2014 172–180 [Google Scholar]

[16] O.I. Abdullah, J. Schlattmann, “Contact Analysis of a Dry Friction Clutch System”, ISRN, 2013, ID 495918, (2013). [Google Scholar]

[17] W. Nowacki, W. Nowacki Thermoelasticity 1962 Pergamon Press Oxford (UK) [Google Scholar]

[18] Oday I. Abdullah, Josef Schlattmann An Investigation Into the Thermal Behavior of the Grooved Dry Friction Clutch Journal of Tribology 136 2014 [Google Scholar]