EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 76 (2016) MATEC Web Conf., 76 (2016) 04044 References
Open Access
Issue
MATEC Web Conf.
Volume 76, 2016
20th International Conference on Circuits, Systems, Communications and Computers (CSCC 2016)
Article Number 04044
Number of page(s) 5
Section Computers
DOI https://doi.org/10.1051/matecconf/20167604044
Published online 21 October 2016
  1. Suárez, R., Roa, M. A., & Cornellà, J., Grasp quality measures. Technical University of Catalunya, Technical Report IOCDT-P-2006-10 (2006) [Google Scholar]
  2. Roa, M. A., Suárez, R., Grasp quality measures: review and performance, Autonomous Robots, vol 38, Issue 1, pp 65–88 (2015) [CrossRef] [Google Scholar]
  3. Gabiccini, M., Farnioli, E., and Bicchi, A., Grasp and manipulation analysis for synergistic underactuated hands under general loading conditions, In International Conference of Ro-botics and Automation - ICRA 2012, pages 2836–2842, Saint Paul, MN, USA (2012). [Google Scholar]
  4. Gabiccini, M., Farnioli, E., Bicchi, A., Grasp Analysis Tools for Synergistic Underactuated Robotic Hands. International Journal of Robotic Research, vol. 32, pp. 1553–1576 (2013) [CrossRef] [Google Scholar]
  5. Lotti, F., Vasura, G., Design aspects for advanced robot hands, In Proc. of IEEE/RSJ In-ternational Conference on Intelligent Robots and Systems, Lausanne, Switzerland, september 30 - October 4, 2002. [Google Scholar]
  6. Roccella, S., Carrozza, M.C., Cappiello, G., Dario, P., Cabibihan, J.J., Zecca, M., Miwa, H., Itoh, K., Matsumoto, M., Takanishi, A., Design, fabrication and preliminary results of a Novel anthropomorphic hand for humanoid robotics: RCH- 1, Proceedings of 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems, Sendai, Japan, September 28 - October 2, 2004 [Google Scholar]
  7. Hirose, S., Umetani, Y, The development of soft gripper for versatile robot hand, Mechanism and Machine Theory, vol. 13, pp. 351–359 (1978) [CrossRef] [Google Scholar]
  8. Catalano, M., Grioli, G., Serio, A., Farnioli, E., Piazza, C. and Bicchi, A., Adaptive Syner-gies for a Humanoid Robot Hand. In Proc. of IEEE-RAS International Conference on Hu-manoid Robots, Osaka (Japan) , October 2012 [Google Scholar]
  9. Townsend, W., The BarretHand grasper - programmably flexible part handling and assem-bly, Industrial Robot: An International Journal, vol.27, no. 3, pp. 181–188 (2000) [CrossRef] [Google Scholar]
  10. Baril, M., Laliberte, T., Gosselin, C., Routhier, F., On the Design of a Mechanically Pro grammable Underactuated Anthropo-morphic Prosthetic Gripper. Journal of Mechanical Design, issue 135, vol 12, doi: 10.1115/1.4025493 (2013) [Google Scholar]
  11. Dechev, N., Cleghorn, W.L., Naumann, S., Multiple finger, passive adaptive grasp prosthetic hand, Mechanism and Machine Theory, vol. 36, pp 1157–1173 (2001) [CrossRef] [Google Scholar]
  12. Gosselin, C., Pelletier, F., and Lalibertè, T. An Anthropomorphic Underactuated Robotic Hand with 15 Dofs and a Single Actuator. In Proc. of 2008 IEEE International Conference on Robotics and Automation, Pasadena (CA, USA), May 19-23 (2008) [Google Scholar]
  13. Groenewegen, M. W., Aguirre, M. E., & Herder, J. L., Design of a Partially Compliant, Three-Phalanx Underactuated Prosthetic Finger. In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference American Society of Mechanical Engineers (2015) [Google Scholar]
  14. Rossi, C., Savino, S., Mechanical Model of a Single Tendon Finger, Proc. of ICNAAM 2013: 11th International Conference of Numerical Analysis and Applied Mathematics, Rhodes, Greece, Sep 21-27 (2013) [Google Scholar]
  15. Penta, F., Rossi, C., Savino, S., An Underactuated Finger for a Robotic Hand. International Journal of Mechanics and Control, Vol. 15, n.2, ISSN: 1590-8844 (2014) [Google Scholar]
  16. Niola, V., Rossi, C., Savino, S. (2014). “A new mechanical hand: Theoretical studies and first prototyping”, International Review of Mechanical Engineering, volume 8, issue 5, pp. 835 844, ISSN: 19708734. [Google Scholar]
  17. Niola, V., Penta, F., Rossi, C., Savino,S., An underactuated mechanical hand: Theoretical studies and prototyping, International Journal of Mechanics and Control, Volume 16, Issue 1, pp. 11–19 (2015) [Google Scholar]
  18. Carbone G., Rossi C., Savino S., (2015). “Performance comparison between Federica Hand and LARM Hand”, International Journal of Advanced Robotic Systems, 14 July 2015, Volume 12, DOI: 10.5772/60523, ISSN: 17298806 [Google Scholar]
  19. Niola, V., Rossi, C., Savino, S. and Strano, S., Robot trajectory planning by points and tangents. In Proceedings of the 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology, ROCOM ‘10, Hangzhou, China, April 11-13, 2010, pp-91–96 (2010) [Google Scholar]
  20. Niola, V., Rossi, C., Savino, S. – “A New Real Time Shape Acquisition with a Laser Scanner: First Test Results” – ROBOTICS AND COMPUTERINTEGRATED MANUFACTURING, issue 6, vol. 26, December 2010, pp 543–550, ISSN 0736-5845. [CrossRef] [Google Scholar]
  21. Niola, V., Rossi, C., Video acquisition of a robot arm trajectories in the work space, WSEAS Transactions on Computers, vol. 4, issue 7, pp. 830–836, (2005) [Google Scholar]
  22. Niola, V., Quaremba, G., Amoresano, A., A study on infrared thermography processed trough the wavelet transform, Proceedings of the 8th WSEAS International Conference on System Science and Simulation in Engineering, ICOSSSE ‘09, pp 57–62 (2009) [Google Scholar]
  23. Martorelli, M., Rossi, C., Savino, S., Staiano, G. (2015) A Contactless Robot Kinematic Calibration Method by Digital Photogrammetry. International Journal of Mechanics and Control (JoMaC) vol. 16, No.2, ISSN: 1590–8844. [Google Scholar]
  24. Rossi, C. Ancient throwing machines: A method to calculate their performance, Mechanism and Machine Theory, Volume 51, Pages 1–13 (2012). [CrossRef] [Google Scholar]
  25. Rossi, C., Russo, F., A reconstruction of the Greek-Roman repeating catapult, Mechanism and Machine Theory, Volume 45, Issue 1, pp 36–45 (2010) [CrossRef] [Google Scholar]
  26. Rossi, C., Pagano, S., A study on possible motors for siege towers, Journal of Mechanical Design, Transactions of the ASME, Volume 133, Issue 7, Article number 071009 (2011) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.