Open Access
MATEC Web of Conferences
Volume 46, 2016
2nd International Seminar for Fire Safety of Facades
Article Number 01003
Number of page(s) 11
Section Standardization and Regulation
Published online 04 May 2016
  1. Smolka, M. et al., “Semi-natural test methods to evaluate fire safety of wall claddings”, Proceedings of the 1st International Seminar on Fire Safety of Facades, Paris, France, 14–15 November, 2013
  2. Principles of the assessment procedure, the experimental procedure and the evaluation of tests to prove the suitability of fire protection measures against a fire exposure from outside a building close to the facade (‘base fire exposure') for ETICS with polystyrene insulation – Revision 2 by DIBt internal issue 01/30/2015
  3. DIN E 4102-20 (draft) Brandverhalten von Baustoffen und Bauteilen, Teil 20: Besonderer Nachweis für das Brandverhalten von Außenwandbekleidungen. DIN 2009
  4. JIS A 1310 Test method for fire propagation over building façades. Japanese Standards Association, 2015
  5. Nishio, M. et al., “Experimental study on fire propagation over combustible exterior facades in Japan”, Proceedings of the 1st International Seminar on Fire Safety of Facades, Paris, France, 14–15 November, 2013
  6. ISO 13785-1 Reaction-to-fire tests for façades –Part 2: Intermediate-scale test. ISO, 2002
  7. ISO 13785-2 Reaction-to-fire tests for façades –Part 2: Large-scale test. ISO, 2002
  8. Internal Form 281. Ministry of Interior, Department of National Fire Corps, Public and Civil Defense, General Directorate for Prevention and Technical Safety, Italy, 2015
  9. Technical Report TR073 (draft). Large Scale Fire Performance Testing of External Wall Cladding Systems. EOTA PT4 Task Group, 2013
  10. BS 8414-1 Fire performance of external cladding systems. Test methods for non-loadbearing external cladding systems applied to the face of a building. BSI, 2002ISO 9705 Fire Tests- Full-scale Room Test for Surface Products. ISO, 1993
  11. Jensen, G., “Fire spread modes and performance of fire stops in vented façade constructions – overview and standardization of test methods”, Proceedings of the 1st International Seminar on Fire Safety of Facades, Paris, France, 14-15 November, 2013
  12. prEN 1364-6 (draft). Fire resistance tests for non-loadbearing elements – Part 6: Cavity Barriers. CEN, 2015
  13. Yoshioka H. et al., “Large-scale Facade Fire Tests Conducted Based on ISO 13785-2 with Noncombustible Facade Specimens”, Fire Science and Technology, 31, No.1, 2012 [CrossRef]
  14. Yong-Ho Yoo et al., “Study on Prevention of Spread of Vertical Fire along Finishing Materials for External Wall of High-Rise Buildings”, Proceedings of the 1st International Seminar on Fire Safety of Facades, Paris, France, 14–15 November, 2013
  15. NFPA 285. Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components. NFPA, 2012
  16. LEPIR II Test. Large scale Fire Performance testing of construction systems for façade – CECMI (French committee for the evaluation and the classification of products and elements of construction as regards to fire hazard – under the French Ministry of Internal Affairs directives), 2013
  17. MSZ 14800-6 Fire resistance tests. Part 6: Fire propagation test for building facades. Hungarian standardisation institute 2009
  18. SP FIRE 105. Issue 5. Large scale testing of facade systems. SP Boras Sweden, 1994
  19. Önorm B 3800-5 (draft) Fire behaviour of building materials and components – Part 5: Fire behaviour of facades – Requirements, tests and evaluations. Austrian Standards Institute, 2003
  20. GOST 31251-2008. Facades of buildings. Fire hazard test method. Interstate council for standardisation, metrology and certification 2010
  21. NFPA 268. Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source. NFPA, 2012
  22. CAN/ULC-S134. Standard Method of Fire Test of Exterior Wall Assemblies. Underwriters Laboratories of Canada, 2013
  23. CAN/ULC-S101 Standard Methods of Fire Endurance Tests of Building Construction and Materials. Underwriters Laboratories of Canada, 2007
  24. CAN/ULC-S114. Standard Method of Test for Determination of Non-Combustibility in Building Materials. Underwriters Laboratories of Canada, 2005

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.