Study on the tool setting method of micro-milling tool based on in-line holography

Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Changchun University of Science and Technology, Changchun, China

^* Corresponding author: yuhuadong@cust.edu.cn

Abstract

Aiming at the various shortcomings of existing tool setting methods, this paper proposes a coaxial holographic tool setting method for tiny tools. Based on the research and analysis of the principle of holographic imaging and the key issues of holographic images, a set of holographic tool setting detection device for micro milling tool was built, and the micro milling tool measurement was carried out on the five-axis machining center using standard tools. experiment. Experimental results show that the tool setting device can efficiently perform tool setting detection of micro-milling tool. Compared with the measurement results of the high-precision external presetting instrument, the relative error of the contact tool setting instrument is 0.033%, and the relative error of the holographic tool setting prototype is 0.007%, which is more effective in realizing the tool setting of tiny tools. Detection. This result verifies the feasibility of the coaxial holographic tool setting method for micro tool, that is, holographic measurement can be used for high-precision tool setting of micro milling tool.