Issue |
MATEC Web of Conferences
Volume 31, 2015
2015 7th International Conference on Mechanical and Electronics Engineering (ICMEE 2015)
|
|
---|---|---|
Article Number | 03003 | |
Number of page(s) | 4 | |
Section | Mechanical design manufacturing and automation | |
DOI | https://doi.org/10.1051/matecconf/20153103003 | |
Published online | 23 November 2015 |
The Applications and Practice of Additional Workpiece Coordinate System (G54.1 Pn)
Engineering Training Center, Guizhou University, China
a Corresponding author: ig.zrzhou@gzu.edu.cn
The choice of the workpiece coordinate system is a very important for machining center programming practice. Additional coordinate system is often neglected because of “addition”, but under the condition of processing multiple parts at the same time, the programming quality and the efficiency of programming can be greatly improved. This paper is present with the additional workpiece coordinate system of FANUC NC system with application examples, which provide the reference for colleague.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.