| Issue |
MATEC Web Conf.
Volume 132, 2017
XIII International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2017)
|
|
|---|---|---|
| Article Number | 03008 | |
| Number of page(s) | 4 | |
| Section | Issues of mechanics of heterogeneous and composite materials | |
| DOI | https://doi.org/10.1051/matecconf/201713203008 | |
| Published online | 31 October 2017 | |
Quenching temperature influence on elastic and hardness behavior in a biocompatible Ti-based alloy
Ural Federal University, 19 Mira St., 620002 Ekaterinburg, Russia
* Corresponding author: illarionovag@mail.ru
Elasticity modulus and hardness changes in deformed semifinished rods manufactured of biocompatible Ti-6Al-7Nb alloy under quenching from the temperatures in a range of 500-1050°C have been studied by means of indentation. The elasticity modulus and Vickers hardness have been shown to vary from 95 to 115 GPa and from 330 to 520 HV respectively depending on the quenching temperature. Relationship between the elastic and hardness behavior and the alloy phase composition has been found.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.