| Issue |
MATEC Web Conf.
Volume 341, 2021
The VII International Scientific and Practical Conference “Information Technologies and Management of Transport Systems” (ITMTS 2021)
|
|
|---|---|---|
| Article Number | 00016 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/matecconf/202134100016 | |
| Published online | 21 July 2021 | |
Creation of modified friction surfaces
Orel State University named after I.S. Turgenev, Komsomolskaya st. 95, 302026, Orel, Russia
* Corresponding author: gorin57@mail.ru
The article provides information on the creation of modified friction surfaces. The results of the analysis of the applied antifriction film coatings are presented. One of the main problems in the application of thin film coatings is the lack of technological modes recommended by the manufacturer. The composition of the film anti-friction coating is described. The results of experimental studies of the deposition of thin film coatings are presented. Selected pneumatic spray gun for depositing of thin film coating. A series of experiments were carried out to identify the technological modes of applying thin film coatings. A qualitative and quantitative analysis of the results of applying thin film coatings has been carried out. A functional diagram of the application of an antifriction film coating is proposed. On the basis of the conclusions made, recommendations are given on the technological modes of applying thin film antifriction coatings on the modified friction surface.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.