| Issue |
MATEC Web Conf.
Volume 341, 2021
The VII International Scientific and Practical Conference “Information Technologies and Management of Transport Systems” (ITMTS 2021)
|
|
|---|---|---|
| Article Number | 00014 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/matecconf/202134100014 | |
| Published online | 21 July 2021 | |
Optimization design of the stick of an excavator under uncertain loading (in the conditions of the Syrian Arab Republic)
Moscow Automobile and Road Construction State Technical University (MADI) 64, Leningradskiy pr., Moscow, 125319, Russia.
* Corresponding author: galaloomohamad83@gmail.com.
The article is devoted to the optimization design of the stick of a hydraulic excavator at the most frequent and greatest value loads. The uncertain loads acting on the working equipment of the excavator were obtained by the Monte Carlo method based on 3D analytical soil-tool interaction models. The results show that the adopted methodology can be used to optimize the design of elements of the excavator working equipment, since the design of stick was obtained with less weight and lower stress values than the original design.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.