Issue |
MATEC Web Conf.
Volume 322, 2020
MATBUD’2020 – Scientific-Technical Conference: E-mobility, Sustainable Materials and Technologies
|
|
---|---|---|
Article Number | 01005 | |
Number of page(s) | 8 | |
Section | E-mobility, Sustainable Materials and Technologies | |
DOI | https://doi.org/10.1051/matecconf/202032201005 | |
Published online | 14 October 2020 |
Towards the sustainable use of granite powder waste for manufacturing of cementitious composites
Wrocław University of Science and Technology, Faculty of Civil Engineering, pl. Wyspiańskiego 37 50-370 Wrocław, Poland
* Corresponding author: adrian.chajec@pwr.edu.pl
The article is devoted to the description of the current state of knowledge about the possibilities of sustainable use of granite powder waste for manufacturing of cementitious composites. Granite powder waste is waste material resulting from the treatment of granite stone. In dry form, it is harmful to the environment and causes its degradation. One way to reduce its harmful effects is to use it for the sustainable production of cement composites and to use it as supplementary cementitious material (SCM). The results of researches carried out so far related to the impact of granite powder waste on the properties of fresh and hardened cementitious mixes are described. These results were compared and research gaps related to these studies were indicated. In summary, conclusions have been pointed out that indicate that granite powder waste can potentially be used as supplementary cementitious material, but comprehensive, comprehensive research related to this additive should also be carried out.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.