Open Access
Issue
MATEC Web Conf.
Volume 322, 2020
MATBUD’2020 – Scientific-Technical Conference: E-mobility, Sustainable Materials and Technologies
Article Number 01005
Number of page(s) 8
Section E-mobility, Sustainable Materials and Technologies
DOI https://doi.org/10.1051/matecconf/202032201005
Published online 14 October 2020
  1. Ł. Sadowski, M. Piechówka-Mielnik, T. Widziszowski, A. Gardynik, and S. Mackiewicz, J. Clean. Prod. 212, 727-740 (2019) [CrossRef] [Google Scholar]
  2. X. Gao, B. Yuan, Q.L. Yu, and H.J.H. Brouwers, J. Clean. Prod. 164, 410-419 (2017) [CrossRef] [Google Scholar]
  3. M.B. Ali, R. Saidur, and M.S. Hossain, Renew. Sust. Energ. Rev 15 (5), 2252-2261 (2011) [CrossRef] [Google Scholar]
  4. N.A. Madlool, R. Saidur, M.S. Hossain, and N.A. Rahim, Renew. Sust. Energ. Rev 15(4), 2042-2060(2011) [CrossRef] [Google Scholar]
  5. T.Y. Huang, P.T. Chiueh, and S.L. Lo, Resour. Conserv. Recycl. 123, 255-260 (2017) [CrossRef] [Google Scholar]
  6. M. Ahmaruzzaman, Progress in Energy and Combustion Science 36 (3), 327-363, (2010) [CrossRef] [Google Scholar]
  7. S.P. Pandey and R.L. Sharma, Cem. Concr. Res. 30 (1), 19-23 (2000) [CrossRef] [Google Scholar]
  8. C.Y. Lee, H.K. Lee, and K.M. Lee, Cem. Concr. Res. 33 (3), 425-131 (2003) [CrossRef] [Google Scholar]
  9. N. Toubal Seghir, M. Mellas, Ł. Sadowski, and A. Żak, J. Clean. Prod. 183, 858-868 (2018) [CrossRef] [Google Scholar]
  10. N. Toubal Seghir, M. Mellas, Ł. Sadowski, A. Królicka, A. Żak, and K. Ostrowski, Sustainability 11 (8), 2215 (2019) [CrossRef] [Google Scholar]
  11. N. Toubal Seghir, M. Mellas, Ł. Sadowski, A. Królicka, and A. Żak, JOM 71 (3), 1002-1015 (2019) [CrossRef] [Google Scholar]
  12. M. Dobiszewska, Kompozyty cementowe z dodatkiem pylu bazaltowego. (Bydgoszcz 2019) (in Polish) [Google Scholar]
  13. M. Dobiszewska, J. Mater. Educ. 39 (6), 133-156 (2017) [Google Scholar]
  14. B. Jeyaprabha, G. Elangovan, and P. Prakash, Mater. Struct. Constr. 50 (1), 1-14 (2017) [CrossRef] [Google Scholar]
  15. H. Yazici, M.Y. Yardimci, H. Yigiter, S. Aydin, and S. Turkel, Cem. Concr. Compos. 32 (8), 639-648 (2010) [CrossRef] [Google Scholar]
  16. M. Nepomuceno, L. Oliveira, and S.M.R. Lopes, Constr. Build. Mater. 26 (1), 317-326 (2012) [CrossRef] [Google Scholar]
  17. T. Ramos, A.M. Matos, B. Schmidt, J. Rio, and J. Sousa-Coutinho, Constr. Build. Mater. 47, 1001-1009 (2013) [CrossRef] [Google Scholar]
  18. K. Ostrowski et al. Materials (Basel). 11 (8), 1372 (2018) [CrossRef] [Google Scholar]
  19. K. Ostrowski, D. Stefaniuk, Ł. Sadowski, K. Krzywiriski, M. Gicala, and M. Rozariska, Constr. Build. Mater. 238, 117794 (2020) [CrossRef] [Google Scholar]
  20. A.A. Aliabdo, A.E.M. Abd Elmoaty, and E.M. Auda, Constr. Build. Mater. 50, 28-41 (2014) [CrossRef] [Google Scholar]
  21. D.M. Sadek, M.M. El-Attar, and H.A. Ali, J. Clean. Prod. 121, 19-32 (2016) [CrossRef] [Google Scholar]
  22. M. Hunger and H.J.H. Brouwers, Natural Stone Waste Powders Applied to SCC Mix Design (2008) [Google Scholar]
  23. M. Kępniak, P. Woyciechowski, P. Łukowski, J. Kuziak, and R. Kobyłka, Materials (Basel) 12 (10), (2019) [Google Scholar]
  24. T.R. Naik, S.S. Singh, and M.M. Hossain, Cem. Concr. Res. 24 (2), 303-312 (1994) [CrossRef] [Google Scholar]
  25. E. Asadi Shamsabadi, M. Ghalehnovi, J. de Brito, and A. Khodabakhshian, Appl. Sci. 8(10), 1808(2018) [CrossRef] [Google Scholar]
  26. S. Singh, R. Nagar, and V. Agrawal, J. Clean. Prod. 127, 172-182 (2016) [CrossRef] [Google Scholar]
  27. S. Singh, R. Nagar, V. Agrawal, A. Rana, and A. Tiwari, J. Clean. Prod. 116, 223-235 (2016) [CrossRef] [Google Scholar]
  28. L.K. Gupta and A.K. Vyas, Constr. Build. Mater. 191, 155-164 (2018) [CrossRef] [Google Scholar]
  29. G. Medina, I.F. S£ez del Bosque, M. Frías, M.I. Sanchez de Rojas, and C. Medina, J. Clean. Prod. 148, 467-176 (2017) [CrossRef] [Google Scholar]
  30. M. Manikandan and T. Felixkala, Int. J. Civ. Eng. Technol. 8 (4), 2246-2254 (2017) [Google Scholar]
  31. H.D. Al-Hamaiedeh and W.H. Khushefati, J. Appl. Sci. 13 (3), 444-150 (2013) [CrossRef] [Google Scholar]
  32. I. Mármol, P. Ballester, S. Cerro, G. Monrós, J. Morales, and L. Sánchez, Cem. Concr. Compos. 32 (8), 617-622 (2010) [CrossRef] [Google Scholar]
  33. L.G. Li, Y.M. Wang, Y.P. Tan, and A.K.H. Kwan, Powder Technol. 342, 388-396 (2019) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.