MATEC Web Conf.
Volume 322, 2020MATBUD’2020 – Scientific-Technical Conference: E-mobility, Sustainable Materials and Technologies
|Number of page(s)||7|
|Section||E-mobility, Sustainable Materials and Technologies|
|Published online||14 October 2020|
The hygrothermal performance of concrete with coarse aggregates made of recycled concrete pavements
1 Czech Technical University in Prague, Faculty of Civil Engineering, Department of Materials Engineering and Chemistry, Thákurova 7/2077, 166 29 Prague 6, Czech Republic
2 Cracow University of Technology, Faculty of Civil Engineering, Chair of Building Materials Engineering, 24 Warszawska St., 31-155 Cracow, Poland
* Corresponding author: email@example.com
This paper deals with an investigation of the hygrothermal performance of concretes containing various amounts of recycled aggregates originating from crushed concrete pavements. The performance, which was obtained using computational modelling of coupled heat and moisture transport, is predicted on stand-alone samples as well as on built in samples in a real construction exposed to weather data of Ostrava, Czech Republic. The results revealed that the influence of recycled aggregates as substitution for natural stone does not negatively affect the hygrothermal performance of the concrete. The highest difference found was less than 1°C and 12% of RH in the case of stand-alone samples and only 2.2% of RH when built in. Therefore, the application of crushed concrete pavements as aggregates in concrete composition can be highly recommended as it brings other benefits such as economical and environmental.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.