| Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
|---|---|---|
| Article Number | 01009 | |
| Number of page(s) | 9 | |
| Section | Methods and Systems in Machine Design | |
| DOI | https://doi.org/10.1051/matecconf/201925401009 | |
| Published online | 15 January 2019 | |
Application of design of experiment to a FCAW process
1
Institute of Mechanical Technology, Welding Department, Czestochowa University of Technology, Czestochowa, Poland
2
H. Cegielski-Poznań S.A, Poznań, Poland
* Corresponding author: pkordas@wimii.pcz.pl
This work presents the results of research on the anti-abrasion surfacing welds designated to operate under wear conditions. The main purpose of the work was to produce single-layer surface welds by means of semi-automatic hard-facing/surface welding with the use of filler material containing carbide precipitate and with the use of 10 mmand 20 mmwide beads. The samples were subject to visual and penetrant testing and to destructive testing in the form of macro and micro metallographic testing, hardness testing and bend testing with a view to determine the effect which thebeads of various widths have on the analyzed factors.
Key words: hardfacing / cored wire / wear / structure / DOE
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.