| Issue |
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
|
|
|---|---|---|
| Article Number | 03039 | |
| Number of page(s) | 5 | |
| Section | Chapter 3 Information Technology | |
| DOI | https://doi.org/10.1051/matecconf/20166703039 | |
| Published online | 29 July 2016 | |
Experimental Study of ABS Material Shrinkage and Deformation Based on Fused Deposition Modeling
Department of Manufacturing Engineering ,Shanghai University of Engineering Science, Shanghai, 200437, China
a sodarbiscuit@163.com
* Corresponding author: sodarbiscuit@163.com
The CAD model can be directly converted into physical model by rapid prototyping , which provides more convenient means for concurrent design in physical verification. However, the deformation of the material shrinkage can cause large deviation of the molding size in CAD model transforming to physical model. In order to ensure the reasonable assembly of the rapid prototyping part, the forming experiment of ABS material was carried out by the principle of FDM. Through regression analysis, a linear relationship with the molding shrinkage and model size was found Meanwhile, deforming mechanism of prototyping parts was analyzed. The rationality of assembly and quality of print parts can be ensured by these law of pre-process.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.