| Issue |
MATEC Web Conf.
Volume 232, 2018
2018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|
|
|---|---|---|
| Article Number | 04057 | |
| Number of page(s) | 4 | |
| Section | Circuit Simulation, Electric Modules and Displacement Sensor | |
| DOI | https://doi.org/10.1051/matecconf/201823204057 | |
| Published online | 19 November 2018 | |
A High-precision Current Sense Circuit with Trimming for DC-DC Converts
1
School of Electrical Engineering and Control Engineering, XUST, Xi’an 710054, China
2
Xi'an Aerospace 772 Institute, Xi’an 710000, China
A high-precision current sense circuit with trimming is proposed to realize the over-current protection of the power management chip and improve its conversion efficiency. Based on solving the problem of voltage offset and current inrush caused by process deviation, this circuit can detect the value of the inductor current accurately. By designing the bandgap reference circuit and the reference voltage bias network, the required stable reference voltage and bias current can be obtained. The trimming bit selection circuit can realize the trimming function. This circuit is designed with TSMC 180nm 1P3M GEN2 process, and all circuits are verified by Cadence Spectre.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.