MATEC Web Conf.
Volume 232, 20182018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|Number of page(s)||7|
|Section||Circuit Simulation, Electric Modules and Displacement Sensor|
|Published online||19 November 2018|
Real Time In-situ Detection System Research for Methane in Offshore Shallow Gas based on Thin Film Interface
China Jiliang University, Institute of mechanical and electrical engineering, Hangzhou 310018, China
a Corresponding author: email@example.com
In order to get ridded of the non real-time detection methods of artificial site sampled and laboratory instrument analyzed in the field of methane detection in the offshore shallow gas, real-time in-situ detection system for methane in offshore shallow gas was designed by the film interface.The methane in the offshore shallow gas through the gas-liquid separation membrane of polymer permeation into the system internal detection probe, analog infrared micro gas sensor sensed the methane concentration and the corresponded output value, data acquisition and communication node fitted into standard gas concentration.Based on the experimental data compared with the traditional detection method, and further analyzed the causes of error produced by the case experiment. The application results show that the system can achieve a single borehole layout, long-term on-line in-situ on-line detection, and improve the detection efficiency and the timeliness of the detection data.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.