MATEC Web Conf.
Volume 230, 20187th International Scientific Conference “Reliability and Durability of Railway Transport Engineering Structures and Buildings” (Transbud-2018)
|Number of page(s)||7|
|Section||Structures, Buildings and Facilities|
|Published online||16 November 2018|
A method of experimental studies of heat transfer processes between industrial constructions
The Ukrainian Civil Protection Research Institute, 18, Rybalska St., Kyiv, 01011, Ukraine
2 Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Defense of Ukraine, 8, Onoprienko St., Cherkasy, 18034, Ukraine
3 National University of Civil Defense of Ukraine, 94, Chernyshevska St., Kharkiv, 61023, Ukraine
* Corresponding author: firstname.lastname@example.org
A method of experimental study of heat transfer processes between industrial constructions during a fire was developed. Types of equipment necessary for the conduction of the experimental studies were determined. A new type of specimen to be used as the one to be studied when conducting experimental studies was developed. Installation sites of thermocouples and heat flux detector on the specimen under study are shown as layout. Installation sites of the specimens under study relative to heat radiation source were substantiated experimentally. Succession of the conduction of the experimental studies of heat transfer processes between industrial constructions during a fire was developed which consists of the following procedures: production of specimens for the studies, measurement and recording on ambient conditions, measuring of temperature and heat flux on the surface of the specimen under study, and filling 55B test fire with water and diesel fuel. It was established that average temperatures and heat flux density values as well as flame geometry should be measured when performing experimental studies.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.