| Issue |
MATEC Web Conf.
Volume 139, 2017
2017 3rd International Conference on Mechanical, Electronic and Information Technology Engineering (ICMITE 2017)
|
|
|---|---|---|
| Article Number | 00047 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/matecconf/201713900047 | |
| Published online | 05 December 2017 | |
Optimal Design of Grooved Cam Profile Using Non-uniform Rational B-splines
1 College of Mechanical and Electronic Engineering, Shandong Agricultural University, 271018 Tai’an, China
2 Shandong Province Key Laboratory of Horticultural Machinery and Equipment, 271018 Tai’an, China
* Corresponding author: xoyo111@163.com
In order to reduce the fatigue damage in grooved cam mechanisms, grooved cam profile was reconstructed with non-uniform rational B-splines (NURBS). Considering joint friction, dynamic model of grooved cam mechanisms was established and the contact stress between grooved cam and follower was calculated using Hertz contact theory. Taking the minimum contact stress and the minimum acceleration as optimal objectives, integrated design model for respective kinematic and dynamic design approaches was set up. The integrated design mode was optimized to search Pareto-optimal solution by an improved artificial fish swarm algorithm, and optimized NURBS profile for grooved cam was acquired. The results show NURBS profile has better kinematic and dynamic performances. The impacts on grooved cam mechanism are reduced and wear characteristics are improved.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.