MATEC Web Conf.
Volume 175, 20182018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
|Number of page(s)||4|
|Section||Building Equipment Automation|
|Published online||02 July 2018|
Performance of heat pump unit with capillary heat exchanger*
(Beijing Key Laboratory of green built environment and energy efficient technology, Beijing University of Technology, Beijing, China, 100124)
2 (Beijing Key Laboratory of green built environment and energy efficient technology, Beijing University of Technology, Beijing, China, 100124)
Corresponding author : E-mail: firstname.lastname@example.org.
* Corresponding author : E-mail: email@example.com
The heat pump system utilizes shallow geothermal energy in the coastal areas, which not only uses clean energy but also contributes to energy conservation and environmental protection. This paper studies the performance of a heat pump system applied a capillary heat exchanger as an energy collection device. The numerical performance of capillary heat pump showed a good agreement with the experimental data in the winter heating mode and the summer cooling mode. It was concluded that the COP of the heat pump unit using the capillary heat exchanger was 5.32 in winter and 4.32 in summer.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.