| Issue |
MATEC Web Conf.
Volume 173, 2018
2018 International Conference on Smart Materials, Intelligent Manufacturing and Automation (SMIMA 2018)
|
|
|---|---|---|
| Article Number | 01020 | |
| Number of page(s) | 6 | |
| Section | Modeling, Analysis, and Simulation of Intelligent Manufacturing Processes | |
| DOI | https://doi.org/10.1051/matecconf/201817301020 | |
| Published online | 19 June 2018 | |
Design of Three-Section Current Protection Experimental Device for Single
College of Instrumentation & Electrical Engineering, Jilin University, Changchun, China
* Corresponding author : iamwangyongzhi@126.com
Based on the design idea of microcomputer protection, a set of three-section current protection, experimental device was designed by using MCU. Using MCU as the core control of experimental device, the circuits were designed, including the passive filter, current acquisition and signal output; real-ti me, current data were collected. When the current exceeded the setting value, the three-section protection had the single hop or linkage, thereby sending out a tripping signalto the simulated circuit breaker. By testing, the device could store data such as real-time acquisition of the current, alarm, tripping and closing in local database and cloud database, and realize remote monitoring and analysis of devices through cloud service., The device basically reached the goal of laboratory experiment teaching.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.