Issue |
MATEC Web Conf.
Volume 173, 2018
2018 International Conference on Smart Materials, Intelligent Manufacturing and Automation (SMIMA 2018)
|
|
---|---|---|
Article Number | 03076 | |
Number of page(s) | 6 | |
Section | Digital Signal and Image Processing | |
DOI | https://doi.org/10.1051/matecconf/201817303076 | |
Published online | 19 June 2018 |
Research of digital temperature measurement system in vacuum thermal test based on DS18B20
Beijing Institute of Spacecraft Environment Engineering, YouYi Road, Beijing, China
* Corresponding author: zx_cast@sina.com
Temperature measurement is a very important measurement project in spacecraft vacuum thermal test, and thermocouple measurement system is generally used for temperature measurement. In order to reduce the number of wire measuring circuit and improving the measurement system of anti disturbance and high measurement accuracy in vacuum thermal test process, which can be used in digital temperature measurement system of vacuum thermal test design, realizes the digital temperature measuring equipment of spacecraft and ground equipment. The system is composed of digital temperature sensor DS18B20 and acquisition device. It can be connected with remote monitoring computer through LAN network to realize remote monitoring of temperature. The hardware structure, communication protocol and software design of the digital temperature measurement system are given in this paper. The vacuum thermal environment test and comparison with the platinum resistance temperature measurement system. The results show that the stability of the system is good and the difference between the measured value and the PT100 measurement is within 0.5 °C, and the linearity is about ±0.1% which satisfies the requirement of vacuum thermal test.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.