Issue |
MATEC Web Conf.
Volume 156, 2018
The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|
|
---|---|---|
Article Number | 02004 | |
Number of page(s) | 5 | |
Section | Chemical Engineering Fundamentals | |
DOI | https://doi.org/10.1051/matecconf/201815602004 | |
Published online | 14 March 2018 |
Mathematical Modeling of the Drying Kinetics of Thinly-Sliced Saba (Musa Balbasiana) Using Hot-Air Dryer
Faculty of Engineering, University of Santo Tomas, Espaňa Boulevard, 1015 Manila, The Philippines
* Corresponding author: lbpestano@ust.edu.ph
Banana is one of the top produced crops in the Philippines, and among its cultivars is the Musa balbasiana, commonly known as saba. Due to its high moisture content, saba is perishable and one of the methods to increase its shelf-life is drying. The shelf life of saba can be extended up to six months when dried to 12% moisture content. The research focuses on the effect of banana maturity and choses a mathematical model which will best fit its drying kinetics. The banana samples, the unripe and ripe saba, were bone-dried without pre-treatment using a hot-air tray drier. To produce repeatable data, three trials were done for temperatures 40°C, 50°C and 60°C. Among the three mathematical models used in the study, the treated data for both unripe and ripe saba best fit the Laplace Transform Model. Using Lagrange interpolation, the time per trial was computed; unripe saba dried at 50°C achieved the ideal moisture content in an average time of 87.5574 minutes for the three trials while that of ripe saba dried at 40°C achieved the same moisture content in an average time of 88.8619 minutes for the three trials. With the increase in temperature, the discoloration decreased indicating an enzymatic character ofbrowning.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.