MATEC Web Conf.
Volume 250, 2018The 12th International Civil Engineering Post Graduate Conference (SEPKA) – The 3rd International Symposium on Expertise of Engineering Design (ISEED) (SEPKA-ISEED 2018)
|Number of page(s)||7|
|Published online||11 December 2018|
Addition of composite coagulant (polyaluminium chloride and tapioca flour) into electrocoagulation (aluminium and ferum electrodes) for treatment of stabilized leachate
Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia (UTHM), 86400 Parit Raja, Johor, Malaysia
* Corresponding author: firstname.lastname@example.org
Physical-chemical method such as electrocoagulation (EC) and coagulation-flocculation processes work well for the treatment of stabilized leachate. This study investigated the efficiency of combined treatment (electrocoagulation and conventional coagulation) in removing colour and ammonia nitrogen (NH3-N) from stabilized leachate. For this combined treatment, the Fe and Al electrodes with the addition of composite coagulant (PAC and TF) were used. The considered factors were pH, current density, and duration of current flow. It was observed that, the highest removal of colour and NH3N were 96% and 13% at applied current density of 100 A/m2 that equal to 0.5 A and 20 minutes respectively. For single EC treatment, the highest removal was 88% for colour and 25% for NH3N at 60 minutes by 150 A/m2 that equal to 1.3A. Thus, it showed that the combined treatment performed better than single treatment in removing colour while reducing the current, and shorten the duration of current flow.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.