MATEC Web Conf.
Volume 72, 2016Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
|Number of page(s)||5|
|Published online||09 August 2016|
Dynamics of UF6 Desublimation with the Influence of Tank Geometry for Various Coolant Temperature
1 National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
2 Scientific Research Institute of Applied Mathematics and Mechanics at Tomsk State University, 634050 Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
Mathematical model of UF6 desublimation in a vertical immersion tank is presented in the article. Results of calculations of the filling dynamics of the tanks with 1m3 volume at various coolant temperatures, with and without ellipticity of the end walls are given. It is shown that allowance for the ellipticity of the end walls of the tanks leads to a significant increase in the time of desublimation of UF6.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.