| Issue |
MATEC Web Conf.
Volume 110, 2017
International Youth Scientific Conference “Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment” (HMTTSC 2017)
|
|
|---|---|---|
| Article Number | 01070 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/matecconf/201711001070 | |
| Published online | 19 June 2017 | |
Mathematical modeling of melting during laser heating of metal plate
National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: mvp21@tpu.ru
The mathematical modeling of heat transfer processes proceeding together under the conditions of intense phase transformations (melting and metal evaporation) under laser action on a metal plate has been carried out. The analysis of the results has showed that increasing of the laser radiation (ql) power leads to acceleration of the melting process. However, it has been found that the change in the melting dynamics with variation of ql is characteristic only for the plates made of iron and copper. At the same time, it has been found that an increase in ql does not affect significantly the melting rate of the aluminum plates. It has been established that when the laser is exposed to a plate, zones with large temperature gradients are formed which can cause thermal stresses.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.