| Issue |
MATEC Web Conf.
Volume 244, 2018
Innovative Technologies in Engineering Production (ITEP’18)
|
|
|---|---|---|
| Article Number | 01014 | |
| Number of page(s) | 6 | |
| Section | Progressives Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201824401014 | |
| Published online | 05 December 2018 | |
The contribution to the modal analysis of the control system
1
University of Žilina, Faculty of Mechanical Engineering, Univerzitná 1, 010 26, Žilina, Slovakia
2
Schaffler Slovakia, Dr G Schaefflera 1, Kysucké Nové Mesto, Slovak Republic
* Corresponding author: alzbeta.sapietova@fstroj.uniza.sk
This article deals with the analysis of the suitability of using selected solution methodologies while taking into account the different degrees of simplification used. Three ways of determining the first frequency of the mechanism were presented on the lever mechanism of the control circuit. The solution is carried out analytically, then via a calculation model in the program on the dynamics of systems elements MSC ADAMS, and lastly, an experimental measurement was carried out.
Key words: Dynamics / Custom Frequency / Experiment / Analytical Computation / Match
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.