| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01103 | |
| Number of page(s) | 4 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401103 | |
| Published online | 30 October 2018 | |
Definition of the initial information for selecting the cutting tool for automated production preparation
Kazan Federal University, pr.Syuyumbike, d.10A, Naberezhnye Chelny, 423812, Russian Federation
* Corresponding author: a.n.gol@yandex.ru
The certain supply of cutting tools is formed on the machine-building enterprises of the parts group related to tooling as a result of application of technological processes. At preproduction of new pats group it is necessary to be determined with the choice of tool: to project special or to apply already present. In second case it is required to find from a database a suitable tool on totality of preset parameter. The large variety of constructions and methods of application of cutting tools hampers such choice. The article presents the initial information for selecting a cutting tool for automated production preparation.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.