Open Access
| Issue |
MATEC Web Conf.
Volume 406, 2024
2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University
|
|
|---|---|---|
| Article Number | 07012 | |
| Number of page(s) | 13 | |
| Section | AM Material and Part Characterisation | |
| DOI | https://doi.org/10.1051/matecconf/202440607012 | |
| Published online | 09 December 2024 | |
- M. K. Kolamroudi, M. Asmael, M. Ilkan, and N. Kordani, “Developments on Electron Beam Melting (EBM) of Ti–6Al–4V: A Review,” Transactions of the Indian Institute of Metals, vol. 74, no. 4, pp. 783–790, Apr. 2021, doi: 10.1007/s12666-021-02230-9. [CrossRef] [Google Scholar]
- Y. K. Kim, S. H. Park, J. H. Yu, B. AlMangour, and K. A. Lee, “Improvement in the high-temperature creep properties via heat treatment of Ti-6Al-4V alloy manufactured by selective laser melting,” Materials Science and Engineering: A, vol. 715, pp. 33–40, Feb. 2018, doi: 10.1016/j.msea.2017.12.085. [CrossRef] [Google Scholar]
- H. Guleryuz and H. Cimenoglu, “Oxidation of Ti-6Al-4V alloy,” J Alloys Compd, vol. 472, no. 1–2, pp. 241–246, Mar. 2009, doi: 10.1016/j.jallcom.2008.04.024. [CrossRef] [Google Scholar]
- C. Huang, Y. Zhang, J. Shen, and R. Vilar, “Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V alloy,” Surf Coat Technol, vol. 206, no. 6, pp. 1389–1395, Dec. 2011, doi: 10.1016/j.surfcoat.2011.08.063. [CrossRef] [Google Scholar]
- D. A. Brice, P Samimi, I Ghamarian, Y Liu, RM Brice, RF Reidy and JD Cotton., “Oxidation behavior and microstructural decomposition of Ti-6Al-4V and Ti-6Al- 4V-1B sheet,” Corros Sci, vol. 112, pp. 338–346, Nov. 2016, doi: 10.1016/j.corsci.2016.07.032. [CrossRef] [Google Scholar]
- K. Zhang, X Tian, M Bermingham, J Rao, Q Jia, Y Zhu, X Wu, S Cao and A Huang., “Effects of boron addition on microstructures and mechanical properties of Ti-6Al- 4V manufactured by direct laser deposition,” Mater Des, vol. 184, Dec. 2019, doi: 10.1016/j.matdes.2019.108191. [Google Scholar]
- X. Liu, S Chen, J Zhang, G Yang, Y Zhang, T Wang, J Lei, “Enhancement of the electrochemical corrosion resistance of Ti6Al4V alloy reinforced by nano- and micro-TiC particles through directed energy deposition,” Corros Sci, vol. 221, Aug. 2023, doi: 10.1016/j.corsci.2023.111343. [Google Scholar]
- H. Attar, S. Ehtemam-Haghighi, D. Kent, and M. S. Dargusch, “Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review,” Oct. 01, 2018, Elsevier Ltd. doi: 10.1016/j.ijmachtools.2018.06.003. [Google Scholar]
- D. Pan, S Li, L Liu, X Zhang, B Li, B Chen, M Chu, X Hou, Z Sun, J Umeda, K Kondoh, “Enhanced strength and ductility of nano-TiBw-reinforced titanium matrix composites fabricated by electron beam powder bed fusion using Ti6Al4V–TiBw composite powder,” Addit Manuf, vol. 50, Feb. 2022, doi: 10.1016/j.addma.2021.102519. [Google Scholar]
- E. Dong, W. Yu, Q. Cai, L. Cheng, and J. Shi, “High-Temperature Oxidation Kinetics and Behavior of Ti–6Al–4V Alloy,” Oxidation of Metals, vol. 88, no. 5–6, pp. 719–732, Dec. 2017, doi: 10.1007/s11085-017-9770-0. [CrossRef] [Google Scholar]
- L. Z. Mohamed, S. S. Abd Elmomen, and S. El-Hadad, “Influence of the oxidation behavior of Ti–6Al–4V alloy in dry air on the oxide layer microstructure,” Chemical Papers, vol. 76, no. 3, pp. 1627–1638, Mar. 2022, doi: 10.1007/s11696-021-01976- 2. [CrossRef] [Google Scholar]
- A. Maytorena-Sánchez, J. Hernández-Torres, L. Zamora-Peredo, F. López-Huerta, A. Báez-Rodríguez, and L. García-González, “Study and Optimization of the Wear Resistance of Titanium Grade 2 Through a Thermal Oxidation Process with Short Oxidation Times,” Tribol Lett, vol. 70, no. 3, Sep. 2022, doi: 10.1007/s11249-022- 01620-4. [CrossRef] [Google Scholar]
- A. Casadebaigt, J. Hugues, and D. Monceau, “High temperature oxidation and embrittlement at 500–600 °C of Ti-6Al-4V alloy fabricated by Laser and Electron Beam Melting,” Oct. 01, 2020, Elsevier Ltd. doi: 10.1016/j.corsci.2020.108875. [Google Scholar]
- H. Guleryuz and H. Cimenoglu, “Oxidation of Ti-6Al-4V alloy,” J Alloys Compd, vol. 472, no. 1–2, pp. 241–246, Mar. 2009, doi: 10.1016/j.jallcom.2008.04.024. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.