EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 406 (2024) MATEC Web Conf., 406 (2024) 07013 References
Open Access
Issue
MATEC Web Conf.
Volume 406, 2024
2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University
Article Number 07013
Number of page(s) 15
Section AM Material and Part Characterisation
DOI https://doi.org/10.1051/matecconf/202440607013
Published online 09 December 2024
  1. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, W. Zhang, Prog. Mater. Sci. 92, 112-224 (2018) [CrossRef] [Google Scholar]
  2. P.V. Cobbinah, R.A. Nzeukou, O.T. Onawale, W.R. Matizamhuka, Metals MDPI 11(1), 58 (2020) [CrossRef] [Google Scholar]
  3. B. Blakey-Milner, P. Gradl, G. Snedden, M. Brooks, J. Pitot, E. Lopez, M. Leary, F. Berto, A. du Plessis, Mater. Des. 209, 110008 (2021) [CrossRef] [Google Scholar]
  4. A. Paraschiv, G. Matache, M.R. Condruz, T.F. Frigioescu, L. Pambaguian, Materials 15(16), 5777 (2022) [CrossRef] [Google Scholar]
  5. M. Yakout, A. Cadamuro, M.A. Elbestawi, S.C. Veldhuis, J. Adv. Manuf. Technol. 92, 2081-2098 (2017) [CrossRef] [Google Scholar]
  6. D.S. Watring, J.T. Benzing, N. Hrabe, A.D. Spear, Additive manufacturing 36, 101425 (2020) [CrossRef] [Google Scholar]
  7. W.D. Callister, and D.G. Rethwisch, Callister's materials science and engineering (2020) [Google Scholar]
  8. K. Gruber, W. Stopyra, K. Kobiela, B. Madejski, M. Malicki, T. Kurzynowski, J. Manuf. Process 73, 642-659 (2022) [CrossRef] [Google Scholar]
  9. J.R. Hwang, J.Y. Zheng, P.C. Kuo, C.D. Huang, C.P. Fung, Metals MDPI 12(9), 1494 (2022) [CrossRef] [Google Scholar]
  10. S. Azadian, Aspects of precipitation in alloy Inconel 718, Doctoral dissertation, Luleå University of Technology (2004) [Google Scholar]
  11. A. Marques, Â. Cunha, M.R. Silva, M.I. Osendi, F.S. Silva, Ó. Carvalho, F. Bartolomeu, J. Adv. Manuf. Technol. 121(9-10), 5651-5675 (2022) [CrossRef] [Google Scholar]
  12. X. Liu, K. Wang, P. Hu, X. He, B. Yan, X. Zhao, Materials 14(4), 991 (2021) [CrossRef] [PubMed] [Google Scholar]
  13. J. Xu, Z. Wu, J. Niu, Y. Song, C. Liang, K. Yang, Y. Chen, Y. Liu, Crystals 12(9), 1243 (2022) [CrossRef] [Google Scholar]
  14. H. Yang, Z. Wang, H. Wang, Y. Wu, H. Wang, Mater. Sci. and Eng.: A 863, 144517 (2023) [CrossRef] [Google Scholar]
  15. C. Guo, G. Li, S. Li, X. Hu, H. Lu, X. Li, Z. Xu, Y. Chen, Q. Li, J. Lu, Q. Zhu, NMS 5(1), 53-77 (2023) [Google Scholar]
  16. H. Monteiro, G. Carmona-Aparicio, I. Lei, M. Despeisse, Energy Reports 8(3), 298-305 (2022) [CrossRef] [Google Scholar]
  17. S. Fazluddin, V. Ojijo, L. Godfrey, A more competitive South African manufacturing sector through a circular economy. CSIR Report Number: CSIR/MFC/AME/IR/2022/0013/B. CSIR: Pretoria (2022) [Google Scholar]
  18. R.J. Radhakrishnan, P. Kumar, H.L. Seet, S.M.L. Nai, P. Wang, Materialia 21, 101272 (2022) [CrossRef] [Google Scholar]
  19. AP&C [Online]. Available: https://www.advancedpowders.com/powders [Google Scholar]
  20. T. Huynh, A. Mehta, K. Graydon, J. Woo, S. Park, H. Hyer, L. Zhou, D. D. Imholte, N.E. Woolstenhulme, D.M. Wachs, Y. Sohn, MMA 11, 88-107 (2022) [Google Scholar]
  21. U.S. Bertoli, A.J. Wolfer, M.J. Matthews, J.P.R. Delplanque, J.M. Schoenung, Mater. Des. 113, 331-349 (2017) [CrossRef] [Google Scholar]
  22. Colibrium Additive: M2 Series 5 Nickel 718 [Online] https://www.colibriumadditive.com/resources [Google Scholar]
  23. American Society for Testing and Materials (ASTM), ASTM Vol 02.05: Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products, Annual Book of ASTM Standards (2023) [Google Scholar]
  24. J. Schindelin., I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longhair., T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, A. Cardona, Nature Methods, 9(7), 676-682 (2012) [CrossRef] [Google Scholar]
  25. Special Metals [Online]. Available: https://www.specialmetals.com/documents/technical-bulletins/inconel/inconel-alloy- 718.pdf [Google Scholar]
  26. X. Wang, K. Chou, J. Manuf. Process. 48, 154-163 (2019) [CrossRef] [Google Scholar]
  27. SAE International Aerospace Material Specification, “ALLOY BARS , FORINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5. 1(Cb + Ta) - 0.90Ti - 0.50Al Solution and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted ,” SAE Standard AMS5663P , Rev. Aug .2022 [Google Scholar]
  28. Y. Xu, Y. Gong, P. Li, Y. Yang, Y. Qi, J. Adv. Manuf. Technol. 108, 2245-2254 (2020) [CrossRef] [Google Scholar]
  29. Y. Chen, I. Cernatescu, V. Venkatesh, A. D. Stoica, K. An, Mater. Des. 232, 112135 (2023) [CrossRef] [Google Scholar]
  30. D. Deng, R.L. Peng, H. Brodin, J. Moverare, Mater. Sci. & Eng.: A 713 (2018) [Google Scholar]
  31. J. Varela, J. Merino, C. Pickett, A. Abu-Issa, E. Arrieta, L.E. Murr, R.B. Wicker, M. Ahlfors, D. Godfrey, F. Medina, J. of Manuf. and Mater. Process. 4(3), 73 (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.