Characterization of machine noise signals during L-PBF for online monitoring using gas-borne acoustic emission

Open Access

Issue		MATEC Web Conf. Volume 406, 2024 2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25^th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University


Article Number		05004
Number of page(s)		18
Section		Process Development
DOI		https://doi.org/10.1051/matecconf/202440605004
Published online		09 December 2024

J.L. Bartlett, B.P. Croom, J. Burdick, D. Henkel, & X. Li, Revealing mechanisms of residual stress development in additive manufacturing via digital image correlation, Additive Manufacturing. 22, 1–12 (2018) https://doi.org/10.1016/j.addma.2018.04.025. [CrossRef] [Google Scholar]
A. Du Plessis, E. MacDonald, J.M. Waller, F. Berto, Non-destructive testing of parts produced by laser powder bed fusion, Fundamentals of Laser Powder Bed Fusion of Metals, Elsevier, 278–299 (2021) Available at: https://doi.org/10.1016/b978-0-12- 824090-8.00014-7. [Google Scholar]
R. Acevedo, P. Sedlak, R. Kolman, and M. Fredel, Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: state of the art review. J. Mater. Res. Technol. 9 (7), 9457-9477 (2020) https://doi.org/10.1016/j.jmrt.2020.05.092. [CrossRef] [Google Scholar]
M. Strantza, D. Van Hemelrijck, P. Guillaume, D.G. Aggelis, Acoustic emission monitoring of crack propagation in additively manufactured and conventional titanium components. Mechanics Research Communications, 84, pp 8–13 (2017) https://doi.org/10.1016/J.MECHRESCOM.2017.05.009. [CrossRef] [Google Scholar]
H. Krauss, C. Eschey, and M.H. Zaeh, Thermography for monitoring the selective laser melting process, Institute for Machine Tools and Industrial Management (IWB), Technische Universitaet Muenchen, Germany. 999–1014 (2012) [Google Scholar]
H. Köhler, V. Jayaraman, D. Brosch, F. Hutter, and T. Seefeld, A novel thermal sensor applied for laser materials processing. Physics Procedia 41, pp 502–508 (2013) [CrossRef] [Google Scholar]
T. Purtonen, A. Kalliosaari, and A. Salminen, Monitoring and adaptive control of laser processes. Physics Procedia, 56(C), pp 1218–1231 (2014) https://doi.org/10.1016/j.phpro.2014.08.038. [CrossRef] [Google Scholar]
C.U. Grosse, & M. Ohtsu, Acoustic emission testing: Basics for Research-Applications in Civil Engineering, In Acoustic Emission Testing: Basics for Research-Applications in Civil Engineering, Springer Berlin Heidelberg (2008) https://doi.org/10.1007/978-3- 540-69972-9. [CrossRef] [Google Scholar]
W.D. Jolly, The use of acoustic emission as a weld quality monitor, BNWL-SA-2727, Pacific Northwest Laboratories, Richland, Washington, September 1969, 2-22 (1969) https://doi.org/10.2172/4072855. [Google Scholar]
A. Sun, Jr.E. Kannatey-Asibu, M. Gartner, Sensor systems for real-time monitoring of laser weld quality, Journal of Laser Applications,11(4), 153-168 (1999) [CrossRef] [Google Scholar]
D.Y. Kononenko, V. Nikonova, M. Seleznev, J. Van den Brink, D. Chernyavsky, An in- situ crack detection approach in additive manufacturing based on acoustic emission and machine learning, Additive Manufacturing Letter, 5, 1 – 6 (2023) https://doi.org/10.1016/j.addlet.2023.100130. [Google Scholar]
J.Y. Song, A. Dass, A. Moridi, and & G.C McLaskey, Detection of defects during laser- powder interaction by acoustic emission sensors and signal characteristics. Additive Manufacturing, 82, (2024) https://doi.org/10.1016/j.addma.2024.104035. [Google Scholar]
M. Seleznev, T. Gustmann, J.M. Friebel, U.A. Peuker, U. Kühn, J.K. Hufenbach, H. Biermann, and A. Weidner, In situ detection of cracks during laser powder bed fusion using acoustic emission monitoring, Additive Manufacturing Letters, 3, (2022) https://doi.org/10.1016/j.addlet.2022.100099. [CrossRef] [Google Scholar]
N. Eschner, L. Weiser, B. Häfner, and G. Lanza, Development of an acoustic process monitoring system for the selective laser melting (SLM), 29th Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, (2018) [Google Scholar]
W. Boyes, Instrumentation reference book, Butterworth-Heinemann, 4, 1 – 928 (2009) [Google Scholar]
K. Moore, D. Kouprianoff, D. Louw, I. Yadroitsava, I. Yadroitsev, Monitoring for cracks in metal L-PBF using gas-borne acoustic emission, South African Journal of Industrial Engineering, 34(4), 147-154 (2023) https://doi.org/10.7166/34-4-2981. [Google Scholar]
D. Kouprianoff, I. Yadroitsava, A. du Plessis, N. Luwes, I. Yadroitsev, Monitoring of laser powder bed fusion by acoustic emission, Investigation of single tracks and layers, Frontiers in mechanical engineering, 7, 1-17 (2021) doi:10.3389/fmech.2021.678076. [CrossRef] [Google Scholar]
D. Rindskopf, and M. Shiyko, Measures of dispersion, skewness and kurtosis, international encyclopaedia of education, Elsevier, 3, (2010) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.