EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 406 (2024) MATEC Web Conf., 406 (2024) 05003 References
Open Access
Issue
MATEC Web Conf.
Volume 406, 2024
2024 RAPDASA-RobMech-PRASA-AMI Conference: Unlocking Advanced Manufacturing - The 25th Annual International RAPDASA Conference, joined by RobMech, PRASA and AMI, hosted by Stellenbosch University and Nelson Mandela University
Article Number 05003
Number of page(s) 10
Section Process Development
DOI https://doi.org/10.1051/matecconf/202440605003
Published online 09 December 2024
  1. Y. Tu., Z. Tong, and J. Jiang., Metallurgical and Materials Transactions A 44A, pp 1762- 1766, (2013). [Google Scholar]
  2. A. Kawahara, A. Niikura, and T. Doko., Furukawa Review No.24, ISSN 1348-1797 (2003). [Google Scholar]
  3. J.S. Moema, T Ramathe, C.W. Siyasiya and T. Buthelezi, Corrosion Properties for Roll-Bonded Two-Layer AA4045/AA3003 for Heat Exchanger Application, MATEC Web of Conferences 370, 10005 (2022). [CrossRef] [EDP Sciences] [Google Scholar]
  4. J.S. Moema, C.W. Siyasiya, V.K. Morudu, T. Buthelezi, The Effect of Soaking Time on Mechanical Properties of Roll-Bonded AA3003 and AA4045 Used for Heat Exchangers. Metals, 13, pp1636, (2023). [CrossRef] [Google Scholar]
  5. J.S Moema, C.W Siyasiya, K.V. Morudu, N.D. Hadebe, T. Buthelezi, An investigation on SWAAT and electrochemical corrosion behaviour of roll-bonded and brazed aluminium alloy - AA4045/AA3003, MATEC Web Conf., 388, 03002, (2023). [CrossRef] [EDP Sciences] [Google Scholar]
  6. A. Kawahara, A. Niikura and T. Doko, “Development of Aluminum Alloy Fin Stock for Heat Exchangers Using Twin-Roll Continuous Casting Method,” Furukawa Review, No. 24, (2003). [Google Scholar]
  7. S. Kahl, H.E Ekström and J. Mendoza, “Tensile, Fatigue, and Creep Properties of Aluminium Heat Exchanger Tube Alloys for Temperatures from 293 K to 573 K (20°C to 300°C),” Metallurgical and Materials Transactions A, Volume 45A, pp 663-668, (2014). [CrossRef] [Google Scholar]
  8. Q. Zhao, “The influence of Mn, Fe and Si on the work hardening of aluminium alloys,” (2013). [Google Scholar]
  9. R. Verma, “Effect of elevated temperature on mechanical behavior and springback of aluminium alloy brazing sheets,” (2016). [Google Scholar]
  10. J.H. Driver and O. Engler, “Design of Aluminium Rolling Processes for Foil, Sheet, and Plate from,” Encyclopedia of Aluminium and Its Alloys, CRC Press, (2018). [Google Scholar]
  11. A.M.F. Muggerud, E.A. Mortsell, Y. Li, and R. Holmestad, “Dispersoid strengthening in AA3xxx alloys with varying Mn and Si content during annealing at low temperatures,” Materials Science and Engineering: A, vol. 567, pp. 21 - 28, (2013). [CrossRef] [Google Scholar]
  12. Yoo, Y.S.J., Mullins, A., Das, S. et al. Crack propagation in AA3xxx during deep drawing investigated using a combined TKD/dictionary indexing approach. Journal of Materials Research 36, pp. 2754–2762, (2021). [CrossRef] [Google Scholar]
  13. ASTM E8-04. Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, (2020). [Google Scholar]
  14. G. Gottstein and L.S. Shvindlerman, Grain Boundary Migration in Metals, 2nd Edition, Thermodynamics, Kinetics, Applications, (2010). [Google Scholar]
  15. N. Hansen, “Hall–Petch relation and boundary strengthening,” Scripta Materialia vol. 51, pp 801–806, (2004). [Google Scholar]
  16. DJ Lloyd, M Gallerneault, RB Wagstaff. Metall. Mater. Trans. A, 41, pp 2093–2103 (2010). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.