MATEC Web Conf.
Volume 326, 2020The 17th International Conference on Aluminium Alloys 2020 (ICAA17)
|Number of page(s)||4|
|Section||Thermomechanical Processing, Texture & Recrystallization|
|Published online||05 November 2020|
Effects of Si and Zr addition on strength and recrystallization behavior of Al-Mn alloy fin stocks for automotive heat exchanger
Nippon Light Metal Company, 421-3203 Shizuoka, Japan
* Corresponding author: email@example.com
For an Al-Mn alloy heat exchanger fin stocks which continuous casting was simulated in, the effects of Si and Zr addition on strength and recrystallized grain structures after brazing heat treatment were investigated. As a result of tensile test, pre-brazed tensile strength was increased with increasing Si and Zr contents in the Al-Mn alloy. On the other hands, Zr addition have a small effect on post-brazed tensile strength regardless of Si contents. This was attributed the dissolution of Al3Zr or (Al,Si)3Zr precipitates during brazing heat treatment. Post-brazed grain structure were refined with increasing Si contents. Meanwhile, Zr addition led to larger post-brazed grain structures. It was found that Al3Zr or (Al,Si)3Zr precipitated during intermediate annealing played to major role in retarding recrystallization during brazing heat treatment.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.