EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 393 (2024) MATEC Web Conf., 393 (2024) 01007 References
Open Access
Issue
MATEC Web Conf.
Volume 393, 2024
2nd International Conference on Sustainable Technologies and Advances in Automation, Aerospace and Robotics (STAAAR-2023)
Article Number 01007
Number of page(s) 10
Section Materials Science and Manufacturing Processes
DOI https://doi.org/10.1051/matecconf/202439301007
Published online 13 March 2024
  1. Garg, P.; Jamwal, A.; Kumar, D.; Sadasivuni, K.K.; Hussain, C.M.; Gupta, P. Advance research progresses in aluminium matrix composites: Manufacturing & applications. J. Mater. Res. Technol, 8, 4924–4923. (2019) [CrossRef] [Google Scholar]
  2. Samal, P.; Vundavilli, P.R.; Meher, A.; Mahapatra, M.M. Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties. J. Manuf. Processes, 59, 131–133. (2020) [CrossRef] [Google Scholar]
  3. Mahesh, K.V.; Venkatesh, C.V. A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites. Mater. Res. Express, 6, 072001. (2019) [Google Scholar]
  4. Pai, B.C.; Ramani, G.; Pillai, R.M.; Satyanarayana, K.G. Role of magnesium in cast aluminium alloy matrix composites. J. Mater. Sci. 1995, 30, 1903–1911. [CrossRef] [Google Scholar]
  5. Subba, R.E.; Ramanaiah, N. Experimental Study on Mechanical Properties of Aluminium Metal Matrix Composites (AA 6061 Reinforced with MoS2). Int. J. Mater. Sci. 6, 91–93. (2016) [CrossRef] [Google Scholar]
  6. Kumar, S.S.; Pandian, R.S.; Pitchipoo, P.; Rajakarunakaran, S.; Rajesh, S. Investigation of Al-Mg based composite incorporated with MoS2 through powder metallurgy. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., 235, 986–983. (2021) [CrossRef] [Google Scholar]
  7. J.F. Zheng, D. Pieniak and J.L. Mo, studied “Study on rotational fretting wear of bonded MoS2 solid lubricant coating prepared on medium carbon steel”, Archives of civil and mechanical engineering, Vol. 226, pp. 1–8. (2011) [Google Scholar]
  8. Ramadoss, N., Pazhanivel, K., Ganeshkumar, A. et al. Effect of SiC and MoS2 Coreinforcement on Enhancing the Tribological and Anti-Corrosive Performance of Aluminum Matrix (Al6063-T6) Nanocomposites. Silicon 14, 5471–5479 (2022). https://doi.org/10.1007/s12633-021-01334-7. [CrossRef] [Google Scholar]
  9. Gonfa B.K., Sinha D., Vates U.K., Badruddin I.A., Hussien M., Kamangar S., Singh G.K., Ahmed G.M.S., Kanu N.J., Hossain N. Investigation of Mechanical and Tribological Behaviors of Aluminum Based Hybrid Metal Matrix Composite and MultiObjective Optimization. Materials (Basel). 2022 Aug 16;15(16):5607. DOI: 10.3390/ma15165607. PMID: 36013744; PMCID: PMC9413696. [CrossRef] [Google Scholar]
  10. Ragupathy, K., Velmurugan, C., Ebenezer Jacob Dhas, D.S. et al. Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM). Arab J Sci Eng 46, 12045–12063 (2021). [CrossRef] [Google Scholar]
  11. Velmurugan, C.; Muthukumaran, V.; Ragupathy, K., et al.: Modelling Volume loss of heat treated Al6061 composites using ANN. Proced. Mater. Sci 5, 31–40 (2014). https://doi.org/10.1016/j.mspro.2014.07.239. [CrossRef] [Google Scholar]
  12. Gajalakshmi, K.; Senthilkumar, N.; Prabu, B.: Multi-response optimization of dry sliding wear parameters of Al6026 using hybrid gray relational analysis coupled with response surface method. Meas. Cont. 52 (5-6), 540–553 (2019). https://doi.org/10.1177/0020294019842603 [CrossRef] [Google Scholar]
  13. Hamidreza, G.; Mohd, H.I.; Norhayati, A.; Navid, M.: Microstructure development mechanical and tribological properties of a semisolid A356/xSiCp composite. J. Appl. Res. Technol. 15, 533–544 (2017). https://doi.org/10.1016/jjart.2017.06.002. [CrossRef] [Google Scholar]
  14. Manjunath-Patel, G.C.; Shettigar, A.K.; Mahesh-Parappagoudar, B.: A systematic approach to model and optimize wear behaviour of castings produced by squeeze casting process. J. Manuf. Proc 32, 199–212 (2018). https://doi.org/10.1016/jjmapro.2018.02.004. [CrossRef] [Google Scholar]
  15. Vijayakumar, S.; Karunamoorthy, L.: Modelling wear behaviour of Al-SiC metal matrix composites: soft computing technique. Tribol. Mater. Surf. Interfaces 6, 25–30 (2013). https://doi.org/10.1179/1751584X12Y.0000000002 [Google Scholar]
  16. Kumar, S.; Balasubramanian, V.: Effect of reinforcement size and volume fraction on the abrasive wear behaviour of AA7075 Al/SiCpP/M composites—a statistical analysis. Tribol. Int. 43 (1-2), 414–422 (2010). https://doi.org/10.1016/j.triboint.2009.07.003 [CrossRef] [Google Scholar]
  17. Baradeshwaran, A.; Vettivel, S.C.; Elayapermal, A., et al.: Experimental investigation on mechanical behavior, modelling and optimization of wear parameters of B4C and graphite reinforced aluminum hybrid composites. Mater. Design 63, 620–632 (2014). https://doi.org/10.1016/j.matdes.2014.06.054. [CrossRef] [Google Scholar]
  18. Vinoth, K.S.; Subramanian, R.; Dharmalingam, S., et al.: Mechanical and tribological characteristics of stir-cast Al-Si10Mg and self-lubricating Al-Si10Mg/ MoS2 composites. Mater. Tech 46 (5), 497–501 (2012). [Google Scholar]
  19. Singh, N.K., Sethuraman, B. Development and Characterization of Aluminium AA7075 Hybrid Composite Foams (AHCFs) Using SiC and TiB2 Reinforcement. Inter Metalcast 18, 212–227 (2024). https://doi.org/10.1007/s40962-023-01009-6 [CrossRef] [Google Scholar]
  20. Singh, N.K., Sethuraman, B. Development and Characterization of Aluminium AA7075 Hybrid Composite Foams (AHCFs) Using SiC and TiB2 Reinforcement. Inter Metalcast 18, 212–227 (2024). https://doi.org/10.1007/s40962-023-01009-6 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.