EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 393 (2024) MATEC Web Conf., 393 (2024) 01006 References
Open Access
Issue
MATEC Web Conf.
Volume 393, 2024
2nd International Conference on Sustainable Technologies and Advances in Automation, Aerospace and Robotics (STAAAR-2023)
Article Number 01006
Number of page(s) 8
Section Materials Science and Manufacturing Processes
DOI https://doi.org/10.1051/matecconf/202439301006
Published online 13 March 2024
  1. Shejkar, S. K., Agrawal, A., & Agrawal, B. (2020). Walnut Shell Particulates as Filler Material in Polymeric Matrix: A Review. International Journal of Engineering Research in Current Trends. 2(3). 41–43. [Google Scholar]
  2. V. Makwana, S. Ahmad Qureshi, IJSRD - International Journal for Scientific Research & Development. 2018 | ISSN (online): 2321-0613. [Google Scholar]
  3. H. Awad, R. El-gamasy, A. A. Abd El-Wahab, M. H. Abdellatif, Construction and Building Materials, 228 (2019) 116766. [CrossRef] [Google Scholar]
  4. Virendra Rajput, Neelesh Kumar Sahu, Alok Agrawal, Optimization of waste kota stone dust filled epoxy composite by analytical hierarchy process (AHP) approach, Materials Today: Proceedings, 2021, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2021.09.168. [Google Scholar]
  5. V. Rajput, D. Kumar, A. Sharma, S. Singh, Rambhagat, lasted journal for advanced research in applied sciences, 5 2018, 2394–8442. [Google Scholar]
  6. Moslem, S., Çelikbilek, Y. An integrated grey AHP-MOORA model for ameliorating public transport service quality. Eur. Transp. Res. Rev. 12, 68 (2020). https://doi.org/10.1186/s12544-020-00455-1. [CrossRef] [Google Scholar]
  7. Jaksan D. Patel, Kalpesh D. Maniya, Application of AHP/MOORA Method to Select Wire Cut Electrical Discharge Machining Process Parameter to Cut EN31 Alloys Steel with Brasswire, Materials Today: Proceedings, Volume 2, Issues 4-5, 2015, Pages 2496–2503, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2015.07.193. [CrossRef] [Google Scholar]
  8. Khoiry, I’tishom & Gernowo, Rahmat & Surarso, Bayu. (2021). Fuzzy-AHP MOORA approach for vendor selection applications. Register: Jurnal Ilmiah Teknologi Sistem Informasi. 8. 24. DOI: 10.26594/register.v8i1.2356. [CrossRef] [Google Scholar]
  9. Utama, D. M., Asrofi, M. S., & Amallynda, I. (2021, June). Integration of AHP-MOORA algorithm in green supplier selection in the Indonesian textile industry. In Journal of Physics: Conference Series (Vol. 1933, no. 1, p. 012058). IOP Publishing. [CrossRef] [Google Scholar]
  10. Sonawane, S. & Wangikar, Sandeep. (2021). Optimization of WEDM Parameters During Machining of Ni-75 Using AHP-MOORA Method. DOI: 10.1007/978-3-030-69921-5_102. [Google Scholar]
  11. Senthil, P., Vinodh, S., and Singh, A. K. (2014). Parametric optimisation of EDM on Al- Cu/TiB2 in-situ metal matrix composites using TOPSIS method, International Journal of Machining and Machinability of Materials, 16(1), 80–94. [CrossRef] [Google Scholar]
  12. Debnath, S., & Ghosh, S. (2021). Experimental investigation of Electro discharge machining process by AHP-MOORA technique. Journal of Industrial Engineering and Decision Making, 2(1), 1–7. https://doi.org/10.31181/jiedm200201001d. [CrossRef] [Google Scholar]
  13. Kumar, Naresh & Fekete, Gusztáv & Singh, Tej & Grewal, J.S. (2019). Natural Fiber Reinforced Brake Friction Composites: Optimization Using Hybrid AHP-MOORA Approach. AIP Conference Proceedings. 2142. 150015. DOI: 10.1063/1.5122564. [CrossRef] [Google Scholar]
  14. Görener, Ali & Taşçı, Emre. (2016). Evaluating the strategies of medical tourism sector through AHP and MOORA in a SWOT framework. Journal of Global Strategic Management. 2. 15–15. DOI: 10.20460/JGSM.20161024353. [CrossRef] [Google Scholar]
  15. Satoglu, S. I., & Türkekul, İ. (2021). Selection of Material Handling Equipment using the AHP and MOORA. Jurnal TeknikIndustri, 22(1), 113–124. [Google Scholar]
  16. V. Gadakh, V. B. Shinde, N. S. Khemnar (2013) Suitable welding parameters selection indifferent welding Processes with MOOR Amethod. International Journal of Advanced Technology 69: 9–12. [Google Scholar]
  17. Perez-Vega, S., et al., Analytical hierarchy processes (AHP) for the selection of solvents in early stages of pharmaceutical process development. Process Safety and Environmental Protection, 2011. 89(4): p. 261–267. [CrossRef] [Google Scholar]
  18. Singh, N. K., S. Balaguru, R. K. Rathore, A. K. Namdeo, and A. Kaimkuriya. “MultiCriteria Decision-Making Technique for Optimal Material Selection of AA7075/SiC Composite Foam Using COPRAS Technique”. Journal of Mines, Metals and Fuels, Nov. 2023, https://www.informaticsjournals.com/index.php/jmmf/article/view/34005. [Google Scholar]
  19. Pravin R. Lokhande, Sachin S. Salunkhe, Balaguru Sethuraman, Corrigendum to: Numerical Simulation and Experimentation of Endodontic File using Taguchi DoE, Int. J. Simul. Multidisci. Des. Optim. 13, 11 (2022). [CrossRef] [EDP Sciences] [Google Scholar]
  20. Dağdeviren, M., S. Yavuz, and N. Kılınç, Weapon selection using the AHP and TOPSIS methods under fuzzy environment. Expert Systems with Applications, 2009. 36(4): p. 8143–8151. [CrossRef] [Google Scholar]
  21. Albayrak, E. and Y.C. Erensal, Using analytic hierarchy process (AHP) to improve human performance. An application of multiple criteria decision making problem. Journal of Intelligent Manufacturing, 2004. 15: p. 491–503. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.